KymcoForum.com

General => Technical | How To => Topic started by: zombie on May 03, 2009, 05:53:23 PM

Title: NEW RACING cdi (for 2oo1 kymco zx/50 super fever
Post by: zombie on May 03, 2009, 05:53:23 PM

my 2oo1 super fever has a 70cc malossi jug, matching carb, technigas tuned pipe, malossi variator & clutch, kevlar belt, and kenda speed rated 120x70 ft.,130x60 rr. the scoot does 65-68mph w/200 lbs. rider. the problem is the factory cdi in the derestricted mode only lasts me 100 or so hours. i bought a NEW RACING (tzr-50) cdi on-line, and was given wireing instructions that do not match my harness. does anyone have experience w/ this swap? also i can return the cdi, and purchase a more direct fit, if anyone knows of a reliable part. this scoot is too much fun to have laid up. thanks in advance...&happy trails     zombie

Title: Re: NEW RACING cdi (for 2oo1 kymco zx/50 super fever
Post by: PANCHOBARRONR on June 09, 2009, 12:28:54 AM

try ebay for 35 dlls. or scootersport.com    or moped hospiatl on key west florida you can go to kymcopartsonline.com and see theparts diagram so you can compare the pitures and buy the one with correct plug good luck

Title: Re: NEW RACING cdi (for 2oo1 kymco zx/50 super fever
Post by: Areomyst on June 13, 2009, 01:48:23 AM

What does the wiring diagram look like?  I might be able to help decipher it so that you get it all hooked up correctly.

I put a CDI in a Tomos scooter today, turned the key and tried to start it and the CDI popped and started smoking!  It didn't like that unit at all... put a Kymco CDI in it, and the bike ran fine.  Weird... I'm sure the wiring was set up differently.  Shame though, I ruined a perfectly good brand-new CDI box doing that.

~Josh

Title: Re: NEW RACING cdi (for 2oo1 kymco zx/50 super fever
Post by: zombie on June 20, 2009, 04:53:23 AM

thanks guys, sorry for not checking the forum sooner but other projects have taken precidence. I found you can order "custom tuned cdi boxes direct from SUITAI. they manufacture the kymco box. The fact.U.S. version is limited to 8,000 rpm w/ a very mild advance curve.8 degrees at 4,500 rpm. I had my box tuned to 13,000 rpm w/ 8 deg. at 3000-4500, 10d. at 4500-8000, 8 deg at 8000-13000. it did not change top end mph over a de-restricted box, but it has more pull/ quicker time getting there. the cdi cost 49.99, and shipping from tiawan was 9.50. took 15 days from order to install. again... thanks  P.s.  use ONLY hi-test fuel w/ this timing change

Title: Re: NEW RACING cdi (for 2oo1 kymco zx/50 super fever
Post by: sidthesloth on September 22, 2010, 08:30:19 AM

Hey, zombie, tzr-50 cdi into zx50, done.

Title: Re: NEW RACING cdi (for 2oo1 kymco zx/50 super fever
Post by: billbow45 on June 12, 2011, 04:24:26 AM

zombie, i want a suitai tzr50 for my 04 zx50 what is the address to get one from tiwain. billbow45

Title: Re: NEW RACING cdi (for 2oo1 kymco zx/50 super fever
Post by: sidthesloth on June 12, 2011, 05:52:30 AM

Good luck, hasn't been around in a while. I am not sure where, but he did post a link. If you google it you will find their site. I have emailed them twice, no response.
I beleive the tzr is made by ruima not sutai.

Title: Re: NEW RACING cdi (for 2oo1 kymco zx/50 super fever
Post by: sidthesloth on June 12, 2011, 12:32:07 PM

Link to Suitai Electronics Ltd.
http://www.motorcycle-components.com/rootfiles/cdi.html (http://www.motorcycle-components.com/rootfiles/cdi.html)

Title: Re: NEW RACING cdi (for 2oo1 kymco zx/50 super fever
Post by: thebatman on June 19, 2011, 12:55:15 AM

 :'( :'( :'(   come back home zombie  ???  ???  ???  :'( :'(  :-\
WE/I still miss the Z..... :D
(supposedly the high priced one(like $70) at S.A is the same one that suitai sells and a few $ cheaper... :D)... i remember z sayiong that long ago