KymcoForum.com

Scooters - 125 to 300 => Yager GT 200i => Topic started by: CROSSBOLT on June 13, 2012, 07:08:53 PM

Title: Exhaust heat shield
Post by: CROSSBOLT on June 13, 2012, 07:08:53 PM

Go to "Exhaust Heat Shield" in Like 200i by renko and find out where to get the heat shield bolts......

Karl

Title: Re: Exhaust heat shield
Post by: CapnJ on June 14, 2012, 01:14:17 PM

You can go anywhere and get a M6-1.0 X 25MM Pan head machine screw. I've gotten them in stainless at my local hardware store.

Title: Re: Exhaust heat shield
Post by: CROSSBOLT on June 14, 2012, 04:17:41 PM

Not around here, Cap! Well, the Fastenal store was local, between two small towns in the Deep South.......

Karl

Title: Re: Exhaust heat shield
Post by: CapnJ on June 15, 2012, 07:22:09 PM

Well you should at least be able to order them easier and cheaper if you know the size.
http://www.sears.com/drillspot-machine-screw-m6-1.0-x-25mm-phillips-pan-head/p-SPM5986184901 (http://www.sears.com/drillspot-machine-screw-m6-1.0-x-25mm-phillips-pan-head/p-SPM5986184901)
just for a start.

Title: Re: Exhaust heat shield
Post by: ScooterWolf on June 15, 2012, 08:08:52 PM

Try this site for ordering scooter parts. I used them to buy a new oil dip-stick:

https://kymcopartsonline.com/catalog/index.php?osCsid=ca9c0d226250420e84c1350c2282f5c2

-Wolf

Title: Re: Exhaust heat shield
Post by: CROSSBOLT on June 16, 2012, 06:29:32 PM

What is their S&H, ScooterWolf?

Karl

Title: Re: Exhaust heat shield
Post by: DaveABQ on June 16, 2012, 08:07:49 PM

their S&H is high if you order online, call them to get a reasonable shipping quote

Title: Re: Exhaust heat shield
Post by: ScooterWolf on June 17, 2012, 04:32:48 PM

Thanks for replying, Dave.

Title: Re: Exhaust heat shield
Post by: Covelivn on October 07, 2012, 01:39:46 AM

That is why visual checks don't always help. You don't notice the bolt till it is gone :-\
Had to ride to Lowes, remove one of the 3 remaining screws to take in to fine a replacement and sure enough had to get a pan head instead of phillips. everytime I look at
the odd bolt head I remember to periodically check all screws, especially those.