KymcoForum.com
Offroad => MXU => Topic started by: mxu500- on January 07, 2008, 08:54:36 PM
-
I am gettin ready to replace my drive belt on my 07 mxu500 and also remove 2 of the weights... I was wondering do i need a impact gun to remove the primary clutch or is there another way i can break the nut? just need to know if i should go buy an electric impact for this one job or not...
-
We used an air gun and an electic impact. Both will work just fine. Be sure you are using metric sockets made for impact guns. ;)
-
Hey mxu500- (feel like I am addressing myself ;))
How many miles you got on that '07 500?
Is the belt worn or are you just going to replace it because you are in removing the weights?
-
Well i just went to a buddy's shop and we used the impact.. Put the new belt on and made no difference from the old belt..... Reason for replacing the belt was after describing my problem to someone who knows about the mxu500 thats what they suggested the problem sounded like.... i also took out the 2 roller weights tonight when we changed the belt....
my 07 mxu500 has i believe a lil over 200 miles on it.
the bike takes so much throttle just to get it to move...
the motor runs fine but no matter what gear i am in lo/hi/r 4x4... it's like the tranny or whatever it is isn't grabbing.. or for example put your manual transmission in 5th gear and try to take off you need to use almost full throttle to just get it moving and i have to keep the throttle open just to try and hit 10 mph on it. I am at a loss now i have no clue what could be wrong with it especially with so little miles on it.
I am mxu300 on atv frontier for those wondering..
-
i called my dealer about a month ago explaing it to them what was going on and they said to bring it in and pay for the tech to check it out.. they said my bike only had a 6 month warranty on it... there was never an additional or any other kind of warranty offered to me when i bought it.... but i just looke at kymco's website and it says there is a 1 year limited warranty not sure what that includes...I bought it the last week of june 07
-
Has you or anyone else removed the secondary? Maybe changing springs or something?
Did you buy it new or was it used and previously registered? The warranty starts when the unit is registered and it has a year warranty.
-
no we never took of the secondary ( thats the big one the belt rides on right ?? lol) i mean if you are looking at it there is 2 the primary where i pulled the weights from and then the second one..
it was bought brand new had 2 miles on it when i got it in the end of june 07..
-
Yes, the one with the clutches.
Is the belt the exact size of the one taken off? Is it making any different sounds than before the problem. Sorry for all the questions?
Ok, the unit does have a 1yr warranty. I would highly recommend taking it to the dealer. Now you should not have taken the weights out though. Not that it's a bad idea or anything, it's just you modified the unit and they may no look at that unfavorably when trying to cover it under warranty.
The dealer should have given you a copy of the warranty, I would ask them for a copy. The dealer may be a multiline and used to the 6 mo warranty offered by other brands, the rep you spoke with may not have been aware.
Anyhow, keep us apprised of your saga!
Tony