KymcoForum.com
Scooters - 125 to 300 => Super 8 150 => Topic started by: mrscooter on May 16, 2012, 07:36:44 PM
-
It sounds simple enough, but I can't figure out how to tighten the right mirror on my super 8 to keep it from drooping (it's tight at the handlebars).
There's something below the mirror, like a collar, that spins around, but won't tighten. If that's a bad sign, any idea where to get an exact replacement mirror? Thanks!
-
If you're talking about where the mirror joins the stalk, I don't think that's adjustable. You could try sliding that rubber collar off and seeing if the ball joint underneath has a nut to tighten it, but as I said, I don't think it can be tweaked. If you don't insist on an exact fit, there are generic replacements available for 25 bucks or so (http://www.scrappydogscooters.com/COMMON_PARTS.html (http://www.scrappydogscooters.com/COMMON_PARTS.html)). There are a lot on ebay starting around $16.
-
I have the same problem with the right mirror of my s8. I don't like replacement mirrors, instead I'm considering stock mirrors of other motorcycle/scooter brands. This is a stock mirror of a local kawasaki motorbike that looks nice.
(http://cdn.sulitstatic.com/images/2012/0214/043238660_0422052998f9bd2826aa2e3928dac70a3f6ffdf3724bc7ec2.jpg)
-
Thanks. I'm temporarily using strong tape, and might even try to use a liquid metal epoxy. If that doesn't work, I'll look into new mirrors like you suggest, unless there's a way to find exact replacements. Be well and thanks to both of you!!!
Keep the shiny side up and the sticky side down!
Michael
-
Why not try Goop instead of epoxy. Goop is somewhat flexible and can absorb vibrations.
-
You mean that rubber boot thingy? I just put some silicone glue on mine never got attitude from it again.
-
Yup! same purpose..