KymcoForum.com

Scooters - 125 to 300 => People 150 => Topic started by: tomsnott on May 15, 2012, 03:07:36 AM

Title: can anyone tell me how to remove rear nut to change compression/clutch springs
Post by: tomsnott on May 15, 2012, 03:07:36 AM

I have a 2008 people 150 and decided to get a new variator, rooler weights and springs. I was able to change the roller weights
but I can't get the rear nut off to get to the clutch assemblyoff to chabge the springs. I've tried jamming the rear brake to hold but it slips.
Can anyone tell me how to remove it?
Thanks,
Tom

Title: Re: can anyone tell me how to remove rear nut to change compression/clutch springs
Post by: Vivo on May 15, 2012, 05:12:21 AM

Quote from: tomsnott on May 15, 2012, 03:07:36 AM

I have a 2008 people 150 and decided to get a new variator, rooler weights and springs. I was able to change the roller weights
but I can't get the rear nut off to get to the clutch assemblyoff to chabge the springs. I've tried jamming the rear brake to hold but it slips.
Can anyone tell me how to remove it?
Thanks,
Tom

http://members.modernvespa.com/fabio_dougie/uploads/et2_clutch_nut_removal_optimized_898.jpg (http://members.modernvespa.com/fabio_dougie/uploads/et2_clutch_nut_removal_optimized_898.jpg)

Title: Re: can anyone tell me how to remove rear nut to change compression/clutch springs
Post by: zombie on May 15, 2012, 06:17:28 AM

That tool, and an impact driver will make short work of it.

Title: Re: can anyone tell me how to remove rear nut to change compression/clutch springs
Post by: MikeKymco on May 30, 2012, 02:32:18 AM

Hey tomsnott,

Were you replacing worn out parts or going for better performance with these changes?  Or both?  How did it turn out?

Thanks.

Mike