KymcoForum.com

Scooters - 50cc => Agility 50 => Topic started by: stevenk24 on May 13, 2012, 09:58:54 PM

Title: speed needed
Post by: stevenk24 on May 13, 2012, 09:58:54 PM: mine gose 43 done cdi and drive boss i think it was done but i want more speed any help ??
Title: Re: speed needed
Post by: zombie on May 13, 2012, 10:13:36 PM: Read thru Every Thing Wordslinger posted from 3 years ago on. Tuning the cvt is your next big improvement area. Contra spring (1500), and a Good Var will get you close to 50 if everything else is working well. Not much more than that to be had actually. 50 is a doable goal on the agility.
Title: Re: speed needed
Post by: juice on May 13, 2012, 11:05:11 PM: You have NEVER been even slightly satisfied with your a50 , and I don't think you would be if you were able to attain 50mph . So if you need more speed get a larger machine , JMO .
Title: Re: speed needed
Post by: blue on May 13, 2012, 11:06:08 PM: mine did do 43 now it struggles to get there. after time everything wears out and the scoot well get slower. only thing I can do now is get the big clutch spring. and keep up on the rollers.
Title: Re: speed needed
Post by: wordslinger on May 15, 2012, 03:18:24 AM: Read thru Every Thing Wordslinger posted from 3 years ago on

..dang....that's gonna take a while.....

..start with 40lbs of air in your tires..adjust your valves to .04mm

..yank that airbox off your scoot, and put on a K&N filter...

..get ready to pull your hair out as you jet and re-jet and modify your needle and it's retaining clip, cause you really need to do that for good mid-throttle...and buy a bunch of plugs..

..skip the blown-air induction, unless you're adventurous... 8)

..and dont even read the exhaust mod stuff....

..change the oil...put inna malossi multivar with 5.5grams or less..yup, a 1500 contra and some 1000 flys...

..from there...well, who really knows??

:-*
Title: Re: speed needed
Post by: zombie on May 15, 2012, 06:26:05 AM: Man... Three years of Ag posts put into three paragraphs. I guess there is a lot of wasted space...
My ZX sh** would be...
Don't bother brother!

3 words.
Title: Re: speed needed
Post by: blue on May 15, 2012, 01:44:37 PM: Quote from: zombie on May 15, 2012, 06:26:05 AM
Man... Three years of Ag posts put into three paragraphs. I guess there is a lot of wasted space...
My ZX sh** would be...
Don't bother brother!

3 words.
3 words well do.................GET BIGGER SCOOT.......................
Title: Re: speed needed
Post by: zombie on May 16, 2012, 01:07:35 AM: Get NEWER Scoot... I have parts from Every F'n country EXCEPT USA/Russia.
It takes WEEKS to get spark plugs!

Taiwan: Engine case/frame/wheels/suspension/spark plugs
Italy: Cylinder/tires/fork springs/bushings/gear sets/rollers/clutch/Ign coil
Japan: Piston/bearings/varaitor/torque drive set/2 pipes
Philippines: 1 pipe
USA: MSD cdi
China? All their sh** is in the trash.
Title: Re: speed needed
Post by: thebatman on May 16, 2012, 01:11:29 AM: It takes WEEKS to get spark plugs!

Dam,, what plugs you buying?
I run down to the local Napa Auto parts and by my mines.............usually. (they were out for a cpl weeks)
Title: Re: speed needed
Post by: zombie on May 16, 2012, 01:21:13 AM: NGK BR9HSA They are not sold in the US. I can't figure why? I have to get them from Jiangwayne...24.95 for six shipped.
Title: Re: speed needed
Post by: wordslinger on May 16, 2012, 01:29:48 AM: ..i know.....advance auto never heard of'm...not in their database...
Title: Re: speed needed
Post by: thebatman on May 16, 2012, 01:32:30 AM: NGK BR9HSA They are not sold in the US

I need to go look at the last i bought. I'd SWEAR i bought those..... unless it's the HS i had gotten and not the HSA..
Dam, what did i do wit em?...hmmmm....

OOPS.... My bad... yep, mine are the HS bought local
Title: Re: speed needed
Post by: zombie on May 16, 2012, 01:38:51 AM: YUP! The HS is a standard Outboard plug...
Title: Re: speed needed
Post by: wordslinger on May 16, 2012, 01:47:14 AM: ...the hs is shorter...more ccs!!...lmao...
Title: Re: speed needed
Post by: baddi on May 16, 2012, 09:23:47 AM: Quote from: wordslinger on May 16, 2012, 01:47:14 AM
...the hs is shorter...more ccs!!...lmao...

The displacement is the same, but the compression is lower, when there are more room in the combustion chamber. :D
Title: Re: speed needed
Post by: zombie on May 17, 2012, 01:18:10 AM: http://www.amazon.com/Champion-831-UL77V-Racing-Series/dp/B001HBSUCQ (http://www.amazon.com/Champion-831-UL77V-Racing-Series/dp/B001HBSUCQ)
Title: Re: speed needed
Post by: whiteknight on May 19, 2012, 07:09:36 AM: how the hell does that work?? i have never seen a plug like that before.
Title: Re: speed needed
Post by: Vivo on May 19, 2012, 09:57:03 AM: Surface gap spark plug preferred for sustained high speeds. The spark is suppose to glide over the tip to provide a "spark" without the electrode sticking out. Said to give better performance compared with the conventional electrode. You must have the right heat range though and have the right clearance with the top of the piston.
Title: Re: speed needed
Post by: zombie on May 20, 2012, 04:56:44 AM: I have two champion, and two Ngk's are on the way. They list for 22.00 but I found them for factory pricing @ 3/4 bucks I'll try one of the champions on a Hi Per. coil (30,000v orange), and let you know how it works but I have a 60,000v system in store for them. That's what they are made to run.
Title: Re: speed needed
Post by: zombie on May 20, 2012, 05:00:50 AM: http://www.ebay.com/itm/Pertronix-Flame-Thrower-HV-60-000-Volt-E-core-Coils-/350197868838?pt=Motors_Car_Truck_Parts_Accessories&hash=item51896b6926&vxp=mtr (http://www.ebay.com/itm/Pertronix-Flame-Thrower-HV-60-000-Volt-E-core-Coils-/350197868838?pt=Motors_Car_Truck_Parts_Accessories&hash=item51896b6926&vxp=mtr)

http://www.pertronix.com/prod/ig/flame/coils/60000_volt.aspx (http://www.pertronix.com/prod/ig/flame/coils/60000_volt.aspx)