KymcoForum.com
Scooters - 50cc => zx50 => Topic started by: 02 zx 50 s.f. on April 22, 2012, 01:21:44 PM
-
Scooter assigns bbk is it worth your Time
-
Scooter assigns bbk is it worth your Time
Say what ??? ???
Do you mean scooter assassins?
If so, i've not tried the bbk from him.. BUT he does have alot of the same stuff as other ppl
It takes 10-14 days to recieve from him as well. I have ordered alot of items from him for sure..
The BBK'S should be ok. YOU will need to check for extra material from the casting and remove as necessary..
YOU SHOULD also check the port timings,etc.... You CAN lose power if everything is "out of whack" and of course i would NOT try and use the tiny 13mm carb.. Start-up is ok but running...NOT...
-
I rember hearing people on here say that it ran but died very soon it's only 64 for a 70cc idk.
-
It will also depend on HOW the kit was installed..
Alot of ppl expect a "plug an play".. To do a CORRECT, longer lasting mod, it is NOT just that easy..
OF course Malossi or an Arsial is the best out there... WAIT A MINUTE... I have a Ruima kit myself now and i was liking that kit before i RIPPED the rear end out. ;D :o
-
And that is the kit they are selling ?
-
I don't think he actually sells Ruima stuff BUT i did see they are selling a "Naraku" kit for another kymco
Naraku is suppose to be good stuff. I do believe word is using a Naraku kit on ONE of hie S9's.
-
http://www.spi-parts.com/scooter-parts/honda/dio-sp-sr-2t-air/kit-honda-scooter-gp-sp-sc-w-h.html (http://www.spi-parts.com/scooter-parts/honda/dio-sp-sr-2t-air/kit-honda-scooter-gp-sp-sc-w-h.html)
http://www.spi-parts.com/cilindro-47-ghisa-sp-16.html (http://www.spi-parts.com/cilindro-47-ghisa-sp-16.html)