KymcoForum.com

Scooters - 50cc => Agility 50 => Topic started by: ScooterCommuter on April 08, 2012, 01:16:02 AM

Title: Guilty 50 +new order from scooterassassins =...
Post by: ScooterCommuter on April 08, 2012, 01:16:02 AM: ...= BIG sh**-EATING GRIN :)
Title: Re: Guilty 50 +new order from scooterassassins =...
Post by: zombie on April 08, 2012, 04:38:50 AM: I remember when you were afraid of changing fuel brands Scoot!
Title: Re: Guilty 50 +new order from scooterassassins =...
Post by: wordslinger on April 08, 2012, 04:40:02 AM: :P
Title: Re: Guilty 50 +new order from scooterassassins =...
Post by: streido on April 08, 2012, 12:42:09 PM: I hate waiting for that slow boat from China, good when it finally arrives tho.
Title: Re: Guilty 50 +new order from scooterassassins =...
Post by: zombie on April 08, 2012, 10:44:47 PM: Sooooooo. What did you get?
Title: Re: Guilty 50 +new order from scooterassassins =...
Post by: ScooterCommuter on April 10, 2012, 03:39:02 AM: well, I had some slightly beefier valve springs to hand, so I went for a totally unlimited cdi...

Carb and airbox are still stock but it will still do about 47 on the flat... I dont think I'm gonna get more out of it without a free-flow filter feeding a bigger carb.

[Edited to add...] I'll probably go for a bigger scoot before I spring for that though....
Title: Re: Guilty 50 +new order from scooterassassins =...
Post by: zombie on April 10, 2012, 03:57:18 AM: That's exactly right. I put the 50mm bbk on one, and it runs fine on the stock carb, airbox, and pipe. It does 55 winding out flat but cruises pretty good at 45. I did drill eight 3/8" holes around the tail pipe, and took off the diffuser.
If yours ever wears out look into the kit. It's 60 bucks shipped, and it took me 2.5 hrs. to be riding.
http://www.ebay.com/itm/100cc-Big-Bore-Kit-139QMB-GY6-50cc-scooter-parts-gasket-/330459445932?pt=Other_Vehicle_Parts&vxp=mtr&hash=item4cf0eafaac (http://www.ebay.com/itm/100cc-Big-Bore-Kit-139QMB-GY6-50cc-scooter-parts-gasket-/330459445932?pt=Other_Vehicle_Parts&vxp=mtr&hash=item4cf0eafaac)
Title: Re: Guilty 50 +new order from scooterassassins =...
Post by: ScooterCommuter on April 10, 2012, 04:09:29 AM: Geez, Zombie.. A bigger pot on top of everything else? I'd be giving 'slinger a run for his money and thats a freakin' scary thought! (but I bet it would be one hell of a blast :) )
Title: Re: Guilty 50 +new order from scooterassassins =...
Post by: zombie on April 10, 2012, 04:14:49 AM: It's a friggin' blast. It is the engine in this
Title: Re: Guilty 50 +new order from scooterassassins =...
Post by: ScooterCommuter on April 10, 2012, 04:23:30 AM: ok, that is officially rated "Badass" :)
Title: Re: Guilty 50 +new order from scooterassassins =...
Post by: zombie on April 10, 2012, 04:27:50 AM: It's only just begun...
Title: Re: Guilty 50 +new order from scooterassassins =...
Post by: wordslinger on April 16, 2012, 03:22:31 AM: ,,,i want one....

;D
Title: Re: Guilty 50 +new order from scooterassassins =...
Post by: zombie on April 16, 2012, 03:39:01 AM: A few more doo dads. Going full led's for lights, all the wiring is finished. full bonded engine/frame/forks/bars so there are no ground wires to run anywhere. It's all single feed +12v. All the grounds attach at the point of the scoot where the piece is installed
Title: Re: Guilty 50 +new order from scooterassassins =...
Post by: zombie on April 16, 2012, 03:41:49 AM: Look around for an '05 Verucci 50cc. It is the only frame I have seen with the ability to convert this way. I got this one for 200.00 bucks, and still have the whole body for other projects.