KymcoForum.com

Scooters - 50cc => Agility 50 => Topic started by: harleyboy1961 on March 15, 2012, 04:56:23 PM

Title: agility 50
Post by: harleyboy1961 on March 15, 2012, 04:56:23 PM

Dose any body have any ideas agility 50cc . cut out while riding, blown a fuse, changed blow again, changed wireing loom. still has no spark at plug but engine turns over,put finger up ht lead lucky no shock , change coil , and cdi unit  no spark at plug , please help

Title: Re: agility 50
Post by: streido on March 15, 2012, 06:33:15 PM

Check the plug end. Maybe take it off the cable and remake the end if it looks bad or worn?
Or check the wiring for breaks or bad connectors?

Title: Re: agility 50
Post by: blue on March 15, 2012, 06:48:48 PM

I had to replace just the end on mine about a year after I got it I went with a hefy duty one.
try that just replce the end of the plug wire.the stock one can be cheap.

Title: Re: agility 50
Post by: zombie on March 15, 2012, 11:32:50 PM

You obviously HAD a short. Use the manual to test the stator. They overheat, and fry the insulator on the windings.