KymcoForum.com
Scooters - 50cc => zx50 => Topic started by: HALEYBABii on March 07, 2012, 10:31:56 PM
-
i just put a 65cc kit on my kymco zx50 i changed the piston wrist pin jug and the crank bearings the crankshaft didn't have to be changed or the exhaust pipe? also i put in a new jet and workin on gettin the air filter but it runs bad.... like nOt good at all when you gas it it dies. it wont idle it'll run maybe 10 secs then cut off... i dont get it everythings brand new. ???
Additional Details
as for the jets i've changed the main one. when i ordered the jets the man specially made them 4 the modifications i have done..idk if he's right about the size or what.....he also sent washers and i have no idea where they go..
today we were messing with it and all of a sudden it wont fire...it ran for about 5 mins cut if off and no fire at all checked the coil...none to the coil.
i dont know where or what the stator looks like and im pretty sure i found the cdi box...is there anyway you can test either one before you go and buy them?
i dont know what could be causing this ive put so much money in it im bout ready to throw it in the river and forget about it. kymcos are supposed to b one of the best scooters and its just not running right at all!!
PLEASE HELP.
oh yeah when you chang the jet do you have to change how much oil it gets? if so how??
-
What river?
-
french broad
-
I'll get my tanks (SCUBA) filled. In the general section the is a thread titled Links to Manuals. The zx is in there, and the stator specs as well. This is an AC fired stator so a test light wont pick up voltage. You need a Multi meter to test. Check the spark plug cap (it screws onto the wire). Also go thru the basics. NEW plug/fuel/filters/compression. If there is any flaw or defect in the new kit you may have broken a ring or worse. End gapping the rings is paramount.
Others will chime in once you get the basics checked. Welcome aboard!
-
Forgot... The amount/type of oil depends on the kit. A rule of thumb is any increase in cc's... ditch the pump, and run premix
-
french broad
Holy swim fins Batman.... That's MY neck of the woods..
HMMMM, another ZX in MY town??????????
-
Start throwing hooks into the river Bro! I'll make sure it gets there... Just kidding ;)
-
I'll be looking for it... ;D
-
:D
Not if I get there first ;D
Don't give up. I know these things can be frustrating. Especially when you need it for transportation and you end up having to take a cab to school >:(
I used to think I wanted to be a mechanic :D. That dream flew out the window long ago. Still better to learn the ins and outs instead of taking it to the dealership every time you have a minor problem.
-
I used to think I wanted to be a mechanic...
Too easy Bro!
Mechanic Blows Up! Lmao Funny (http://www.youtube.com/watch?v=hgKujMCCIlQ#)
-
:D :D :D
"You ain't even got no tools man"
"What you mean man? Chill. I got this"
-
"Oh sh**".. "Fk man, where this nigga went"
:D :D :D :D :D
There's a shop to take your mechanic issues.. :D
-
well i found a stator around here aparently zx parts are very hard to find (man @ scoot shop said)
but they're all over ebay..... ::)
NOT only do the mechanics around here not know what they're talking about, but I REFUSE to take my scoot to a shop they clearly dk what they're doing or they would give you your bike back running right...instead they give it back running like sh**.... >:(
HELL NO!! NO SCOOTER MECHANiC 4 ME. at least if I f*** it up i know what i did and can fix it! LOL :P
oh quick question does anyone know where i can get they front body clip for this bike...i cant find one anywhere and mine is cracked...
i would post a pic of it but i dk how lol this website is new 2 me!! sorry.
hahahahah loved the video it wasssssss soooooooooooooo funny lol
-
Dam, it sounds like you were a victim of "Burnouts" SORRY ASS WORK.....
(dude sux so bad he's trying to swap over to audio sales IN the scoot shop) ::)
Unless of course you went to the sh** shops on Haywood rd...(1 recently moved 35 miles away)(i think to be able to get new customers that haven't been fkd over.)
(burnouts has moved 4 times so far in the last 2 yrs.)
Yeah the ZX is a beast all by itself. Alot of parts will interchange but not a stator... ;)
Are you SURE the stators you seen are for a ZX??? Those don't show up very often.
As far as the front nose cone, You'll more than likely have to order from Kymco..I never found one and had to order new from Kymco myself..($90?)
-
hahah yup burnouts and C+J. scooter doctor is okay...but the dude says he doesnt work on kymcos....and westside is tryin to help all hey can mainly cuz i kno one of the workers there...haha but they just said they have some stators down there and i kno a while back they had a zx 4 parts but its mostly parted out so he's checkin to see if he's got that..
and i looked on the kymco site i cant even find the front piece there!
yeah the kit i put on it and alot of parts i have for it is honda dio and they all work.
the stator goin out f***ed me baddddd.
-
C+J AND BURNOUTS SUCKKKKK!!!
-
I'M NOT THE ONLY MTN FKR ON A FORUM ANYMORE...... :o :o
I"M NOT THE ONLY FKR FROM THE MTNS ANYMORE.. ;D (doing the dance).. :D ::)
WOW, A ZX in Asheville OTHER than my pretty ride..(i still got the fastest on this side of the state. :D ::) 8)) :D :D
I wonder how long before you leave and i'm back to being alone.... ??? :-\ :D
Glad you joined. Lets get that thing jumping and go out and piss off cagers... :D
YEP, whoever you are, you are in my neck of the woods.. I thought it sounded like burnouts.. Dam, you should have joined sooner and i coulda told you that part... ;D
Oh dam, did you happen to buy that kit off C.L.? TOO much $ for that...
I wouldn't take a spark plug to the "scooter doctor" either......IMHO.. Jus sayin.
Fk, i may still have an extra stator... Are you sure it's the stator?????????????
The voltage regulater, the coil, the cdi could make you THINK a stator
Did you make sure your pipe isnt clogged?
(i bought a stator once and of course it wasnt that)
Oh yeah, C&J is the ones that moved 35 mi away from town to swanee sewer.. :D :D :D :D...(swannanoa for the out of towners. :D)
-
BTW, the prices have came down like a mo fo........
http://www.stadiumyamaha.com/pages/OemParts?aribrand=KYM#/Kymco_USA/ZX50/Front_Cover_%26_Floor_Panel_%26_Inner_Box/2K01120005/01120035 (http://www.stadiumyamaha.com/pages/OemParts?aribrand=KYM#/Kymco_USA/ZX50/Front_Cover_%26_Floor_Panel_%26_Inner_Box/2K01120005/01120035)
-
BTW, the prices have came down like a mo fo........
http://www.stadiumyamaha.com/pages/OemParts?aribrand=KYM#/Kymco_USA/ZX50/Front_Cover_%26_Floor_Panel_%26_Inner_Box/2K01120005/01120035 (http://www.stadiumyamaha.com/pages/OemParts?aribrand=KYM#/Kymco_USA/ZX50/Front_Cover_%26_Floor_Panel_%26_Inner_Box/2K01120005/01120035)
Yep, $45. Not bad. I'll be ordering one once I hear this beast run.
-
Yep, $45. Not bad. I'll be ordering one once I hear this beast run.
Shoot no it's not. I paid like $75-80 for mine......(of course a different place too. ;))
-
haha im not leavin asheville born and raised!!
i have a new performance coil tryed it and no its not the coil.... so im down to cdi or stator.
im getting the stator monday seeing how westside is closed til then and kept mine to make sure he had the right part but ima make sure that if it doesnt work i can bring it back he wants 50 for a used one.... can get a brand new one for 45+18 shipping on ebay....
Nah i seen that kit your talkin about on craigslist....i got mine off ebay for 61$ + shipping charges..
hahah swana-no-where!! haha
-
Are you sure it's a ZX stator on ebay for that price? (dio prolly closest)
Yeah, the ZX stator isn't cheap. I had to give $100+ for mine and that wasnt the problem..(as to why i have 2.. :D)(never put the old one back on, was to pissed :D)
Well if scotty don't come up with one, I have a stator and cdi box that i could part with, If you talk nice.. ;D :D ;D :D ;D :D ::) ::)
Got me all discombobulated over a zx in my town, i can't believe that.. :D
-
yeah its a dio. but on that site you gave me a link 2 it was only 60$ ima tell dude he wants to charge me 50$ for it and its used...ima be like ill give you 40...and tell him i can get a brand new one for 60....y do i wanna pay just 10$ less 4 a used one?? dont make much sence to me...maybe he'll give me a deal...i bought a coil thought it was the coil...NOT!! he wouldnt take it back...i was gonna trade it 4 a cdi...couldnt do that...ugh
how much you want 4 em?
hahah me either i never seen one i thought since it was so old nobody had one around here hahaha...fooled me thats cool as f*** tho.
-
SHE RUNS!!!!!! HAHAAHAHAHHAAHAH YESSSSSSSSSSSSSSSSSSSSS. i GOT THE STATOR FOR 40$ PUT iT ON AND iT'LL HAUL ASS NOW i GOTTA GET A PROFORMANCE AiR FiLTER!!
-
SHE RUNS!!!!!! HAHAAHAHAHHAAHAH YESSSSSSSSSSSSSSSSSSSSS. i GOT THE STATOR FOR 40$ PUT iT ON AND iT'LL HAUL ASS NOW i GOTTA GET A PROFORMANCE AiR FiLTER!!
WOOOO HOOOOOO. ;D
Awesome news.
I guess i'll be on the look out for another ZX. ;) I've not ridden this newest build that far yet. ;) :D (i did see 1 ZX around merrimon about 1-1 1/2 yrs. ago, bone stock)
NOW, it's time to hit more with the tuning.. :D ::)
Did you ever check the squish on this build? Check any numbers?
-
I can see it now...
Police VS Scooter: City streets Getaway (http://www.youtube.com/watch?v=nv1HqgT1i44#)
Two things... Man that cop can drive, and How did THREE people fit in that car??? It must have been a clown car...
Clown Car 2010 (http://www.youtube.com/watch?v=NdEkgCspCQo#)
-
:D
No way a crown vic would fit down those sidewalks
-
I seen one the other day near the ice service in emma
-
A clown car full of Super Heros?