KymcoForum.com

Scooters - 50cc => Agility 50 => Topic started by: Scuzz on January 19, 2012, 01:42:40 AM

Title: 125cc Carburetor
Post by: Scuzz on January 19, 2012, 01:42:40 AM

Would this: http://www.chinesemotorcyclepartsonline.co.uk/partno_CRB043.php (http://www.chinesemotorcyclepartsonline.co.uk/partno_CRB043.php) fit an agility 50 to make an 80cc big bore kit work? cheers.

Title: Re: 125cc Carburetor
Post by: blue on January 19, 2012, 04:13:36 AM

that should work just fine.and have room to play with many adjustments.

Title: Re: 125cc Carburetor
Post by: Scuzz on January 21, 2012, 01:58:10 PM

OK fitted the 125 carb and it still wont start. Any ideas?

Title: Re: 125cc Carburetor
Post by: wordslinger on January 21, 2012, 04:38:40 PM

...try adjusting the idle mix..

Title: Re: 125cc Carburetor
Post by: blue on January 21, 2012, 09:43:34 PM

Did you adjust the valves and hows your plug and is gas geting to the carb. try kick starting.

Title: Re: 125cc Carburetor
Post by: Scuzz on January 24, 2012, 08:28:29 PM

OK I adjusted the idle mix screw and it started. Thanks.

Title: Re: 125cc Carburetor
Post by: blue on January 24, 2012, 08:33:44 PM

let us know how your scoot is running wit that carb do you like the over all way it running.

Title: Re: 125cc Carburetor
Post by: wordslinger on January 25, 2012, 02:12:51 PM

OK I adjusted the idle mix screw and it started. Thanks.

..quite welcome   ;D

Title: Re: 125cc Carburetor
Post by: Scuzz on February 02, 2012, 04:45:40 PM

Now my bike is refusing to start again! Any ideas?

Title: Re: 125cc Carburetor
Post by: blue on February 03, 2012, 01:56:11 AM

Do you stell have the old carb try puting it back in and give it a shot.or maybe you just need to find the right adjustment for the one thats in it. try blocking half the air flow with a piece of card board and see it it well starte like that.