KymcoForum.com

Scooters - 125 to 300 => Downtown 300 => Topic started by: Maferto on January 10, 2012, 10:52:07 PM

Title: clutch
Post by: Maferto on January 10, 2012, 10:52:07 PM
Hi, I just say I'm from Spain, the English with google translate it, sorry for the translations that are not good.

I have a super dink 300i abs, and the clutch makes me mad lost, it would be advisable to change it to one of Dr. Pulley?.
thanks
Title: Re: clutch
Post by: Maferto on January 10, 2012, 10:53:29 PM
http://www.drpulley.info/shop/product_info.php?products_id=173 (http://www.drpulley.info/shop/product_info.php?products_id=173)


I almost decided to change it, although not within warranty.
Title: Re: clutch
Post by: Cortez on January 10, 2012, 10:57:10 PM
Quote from: Maferto on January 10, 2012, 10:52:07 PM
Hi, I just say I'm from Spain, the English with google translate it, sorry for the translations that are not good.

I have a super dink 300i abs, and the clutch makes me mad lost, it would be advisable to change it to one of Dr. Pulley?.
thanks

I have never heard a bad thing about the HiT clutch, other then it's price.
I'm probably gonna get it too.
Title: Re: clutch
Post by: TANWare on January 11, 2012, 02:44:43 AM
my suggestion is to go to your dealer and ask if they can install it without effecting your warenty. This is what I did with the Sliders so they could not be blamed............
Title: Re: clutch
Post by: Goodrich on January 16, 2012, 08:53:18 PM
Quote from: Cortez on January 10, 2012, 10:57:10 PM
I have never heard a bad thing about the HiT clutch, other then it's price.
I'm probably gonna get it too.

No doubt...I had an 11 second mustang that used a Zoom kevlar double sided 10.5" clutch that was a few bucks cheaper than this thing.  NUTS !!
Title: Re: clutch
Post by: Cortez on January 17, 2012, 07:44:39 AM
Quote from: Goodrich on January 16, 2012, 08:53:18 PM
No doubt...I had an 11 second mustang that used a Zoom kevlar double sided 10.5" clutch that was a few bucks cheaper than this thing.  NUTS !!

 ;D

You should check out hi-end bicycle parts (prices)!
THIS is NOTHING!
Title: Re: clutch
Post by: TANWare on January 17, 2012, 08:42:38 AM
Yeah, prices can be insane. You have to remember these usually are a low production item so there is going to be a high price. Unlie the rollers that have many applications................
Title: Re: clutch
Post by: Cortez on January 17, 2012, 08:44:07 AM
Quote from: TANWare on January 17, 2012, 08:42:38 AM
Yeah, prices can be insane. You have to remember these usually are a low production item so there is going to be a high price. Unlie the rollers that have many applications................

Even the Pulley weights cost a lot compared to regular stuff.

The original kymco weights cost just a tad less, but no-name generic stuff can be had
for 1/4 of the price for the set, but I wouldn't try my luck since bad weights can screw
up the variator.