KymcoForum.com

Scooters - 50cc => People 50 => Topic started by: metrojet on November 15, 2011, 08:58:57 PM

Title: Done everthing I could...still no spark
Post by: metrojet on November 15, 2011, 08:58:57 PM

I have a people 50cc 2stroke,has no spark,installed new DC-CDI,Rectifier,coil,stator.checked continuity on all wires all seems good....though I notice output at the stator (yellow-white wire)is 1.2vac should it be more. :'(

Title: Re: Done everthing I could...still no spark
Post by: wordslinger on November 16, 2011, 08:29:39 PM

...do you have continuity thru your kill switch and brake switch circuits?..

..do you have a good tight connection at the plug?

..had a similar issue and the tab was missing from the connector...


peace

Title: Re: Done everthing I could...still no spark
Post by: metrojet on November 16, 2011, 10:23:24 PM

yes continuity on all wires not only kill switch,checked from stator to rect. and dc-cdi........Just checked the stator output (isolated)1.6Vac.But its new should  it be at least under 18Vac. :-[

Title: Re: Done everthing I could...still no spark
Post by: metrojet on November 16, 2011, 10:25:33 PM

oh yes I redid the connectors also.so I know its has good contact.