KymcoForum.com

Scooters - Big Bore => Xciting 500 => Topic started by: guile on November 09, 2011, 09:09:34 AM

Title: Tire HUGGER for xciting 500
Post by: guile on November 09, 2011, 09:09:34 AM

Does anyone know of a rear tire hugger for an Xciting 500? I searched the www for one but the don't seem to exist...

Title: Re: Tire HUGGER for xciting 500
Post by: sissy mary on November 09, 2011, 11:13:55 PM

Hugger???? ???

Title: Re: Tire HUGGER for xciting 500
Post by: Hoolander2 on November 10, 2011, 04:52:05 AM

One of those little fenders, ususally black plastic, that hugs the rear tire.   I wish you luck in finding one, guile.  I think it'd look good. 

Title: Re: Tire HUGGER for xciting 500
Post by: Urbestfriend on November 11, 2011, 12:04:22 AM

Urbestfriend didn't know what a tire hugger was either and had to look it up.
It looks like they are readily available for most motorcycles.   You might be able
to adapt one,  however around $100.00 is pretty steep for me.   I'll keep what
came with the bike.  Any experience with a short or no bicycle  fender,  you usually
end up with a dirty or wet back and that's only going 15 mph.

Title: Re: Tire HUGGER for xciting 500
Post by: guile on November 11, 2011, 06:52:44 AM

A good hugger should be standard. The slab of rubber that is hanging there now is a bit ridiculous I think.

I could not find one piece of information about a fitting hugger. I don't see myself drilling holes in the rearaxle to make one fit either. Anyone else up for that? :D

Title: Re: Tire HUGGER for xciting 500
Post by: drifter on November 22, 2011, 06:32:17 AM

there's a guy from taiwan he installed a rear tire hugger and it looked good. not sure if he took it from a downtown or myroad. will try to find pics

Title: Re: Tire HUGGER for xciting 500
Post by: guile on October 06, 2014, 10:13:52 AM

Anyone know of a fitting hugger for the Xciting 500 yet?

Title: Re: Tire HUGGER for xciting 500
Post by: zombie on October 06, 2014, 01:27:06 PM

It should be a straight forward install. I swap fenders all the time.
Try looking at used Motox (dirt bike) parts, or a local scrap yard.
You can easily drill a few holes in the fender, and Zip Tie it to the frame/anywhere really. If you do it nicely no one will ever see a couple zip ties.

Title: Re: Tire HUGGER for xciting 500
Post by: guile on October 06, 2014, 06:05:38 PM

Thanks Zombie

Title: Re: Tire HUGGER for xciting 500
Post by: zombie on October 06, 2014, 06:14:46 PM

No problem.
I prefer the naked tire look on my bikes, but riding year round it gets old having a "skunk stripe" up the front, and back.

For a buddies bike I semi flattened out a Tricycle front fender, and installed it the same way you want to do. A little black spray paint, and he body plastics hid it.

Title: Re: Tire HUGGER for xciting 500
Post by: houndguy on November 01, 2014, 12:35:14 PM

Quote from: zombie on October 06, 2014, 06:14:46 PM

No problem.
I prefer the naked tire look on my bikes, but riding year round it gets old having a "skunk stripe" up the front, and back.

For a buddies bike I semi flattened out a Tricycle front fender, and installed it the same way you want to do. A little black spray paint, and he body plastics hid it.

Had to reread that.  Thought you said you rode naked for a second.  :P

Title: Re: Tire HUGGER for xciting 500
Post by: guile on November 01, 2014, 07:06:31 PM

Quote from: houndguy on November 01, 2014, 12:35:14 PM

Had to reread that.  Thought you said you rode naked for a second.  :P

Good thing you pointed that out XD

Title: Re: Tire HUGGER for xciting 500
Post by: zombie on November 18, 2014, 11:24:14 PM

https://www.youtube.com/watch?v=pcH_2SpqVH0 (https://www.youtube.com/watch?v=pcH_2SpqVH0)