KymcoForum.com
Scooters - Big Bore => Xciting 500 => Topic started by: JustWantToRide on November 01, 2011, 11:36:47 PM
-
This LED flasher relay is only a 2 wire - but it plugs right into the stock plug and works great. The hole in the plastic mounting tab needs to be opened up a bit to mount it where the stock relay was - but that's simple. The only downside is that it doesn't make noise like the stock one. I might have to get a little buzzer from Radio Shack if I miss it much...
(http://www.superbrightleds.com/images/uploads/lfs-1-flat.jpg)
LF1-S-FLAT: Universal Motorcycle Flasher $8.95
http://www.superbrightleds.com/cgi-bin/store/index.cgi?action=DispPage&Page2Disp=%2Ftail-brake-turn.html%23flasher (http://www.superbrightleds.com/cgi-bin/store/index.cgi?action=DispPage&Page2Disp=%2Ftail-brake-turn.html%23flasher)
I paid $19.95 from Custom LED's for mine - then a friend showed me this one which is identical.
-
Did you replace your stock bulbs with LED ones and if so,where did you get them.Do they plug right in or is modification required? This looks like the plug on a super 9,any idea if it will fit?
-
I replaced the bulbs with leds, and added majicblinker modules so the signals are on, then blink off. This flasher relay is a generic type item so I would think it would fit "plug and play" on your scoot also. Check your current bulbs - the Xciting has different bulbs front to back. The 2 links I have in this post have had the brightest bulbs at the best prices that I've found. I have other posts that list the exact bulbs I used - and they are much brighter than the bulbs that I've seen other people buy. Your super9 will probably use the same size bulbs - you just need to check if the alignment buttons are directly opposed or closer to each other (European or US), or a mix like mine were.