KymcoForum.com

Scooters - 50cc => Super 8 => Topic started by: lsammarco on October 13, 2011, 03:03:22 PM

Title: Replacing/Adding tail lights for safety
Post by: lsammarco on October 13, 2011, 03:03:22 PM

I have a  2011 super 8 50 2T. 

I want to replace the brake light bulb with a flashing led bulb and/or add another tail light for safety.

Has anyone done this?  Any recommendations?

Thanks.

Title: Re: Replacing/Adding tail lights for safety
Post by: Vivo on January 06, 2012, 08:04:08 AM

I installed a flashing strobe light and not LED. Connected it to the brake light line. Similar to this one:

http://www.chinatraderonline.com/Files/AUTO/Lights/CAR-STROBE-LIGHT-2216577256.jpg (http://www.chinatraderonline.com/Files/AUTO/Lights/CAR-STROBE-LIGHT-2216577256.jpg)

Title: Re: Replacing/Adding tail lights for safety
Post by: bilyum on January 30, 2012, 11:38:35 PM

Here is one that might interest you! It is not real easy but very worth the install.

http://www.customdynamics.com/knight_rider_led_light_bar.htm (http://www.customdynamics.com/knight_rider_led_light_bar.htm)

Title: Re: Replacing/Adding tail lights for safety
Post by: zombie on January 30, 2012, 11:49:37 PM

You can but a standard flasher unit from any older G.M, Ford, ect. They cost about 10.00, and a very simple install. Cut the wire to thew lights, and add this unit in line. (one wire in, and one wire out.