KymcoForum.com

Scooters - 50cc => Agility 50 => Topic started by: Drnilly007 on October 04, 2011, 05:46:41 AM

Title: How exactly do you do the CDI mod?
Post by: Drnilly007 on October 04, 2011, 05:46:41 AM: I see things here about modding the CDI but no exact instructions step by step... Thanks

and what about these other mods where are they online boss and 82 jet for the US. I am also looking for an air filter mine is clogged with oil.
Title: Re: How exactly do you do the CDI mod?
Post by: woodcutter on October 04, 2011, 10:38:10 AM: Kymco Agility 50 CDI tuning (http://www.youtube.com/watch?v=eaVK2arj9PM#)
Title: Re: How exactly do you do the CDI mod?
Post by: streido on October 04, 2011, 04:29:43 PM: If its a later model then it may not have the same cdi. My 2008 could be cut, heard on another thread the 2010+ models cannot be cut.
Title: Re: How exactly do you do the CDI mod?
Post by: blue on October 04, 2011, 06:39:18 PM: as far as the air filter you can put a washable one in place of the one thats in there . wht I did was cut the old one out and just forced a spunge typ filter in to the oil wear the cardbord filter was works great.and its washable too.
Title: Re: How exactly do you do the CDI mod?
Post by: jezyg on October 04, 2011, 08:09:27 PM: Quote from: streido on October 04, 2011, 04:29:43 PM
If its a later model then it may not have the same cdi. My 2008 could be cut, heard on another thread the 2010+ models cannot be cut.

Yep 2010+ models come with unrestricted CDi so no need to cut.
Title: Re: How exactly do you do the CDI mod?
Post by: Drnilly007 on October 05, 2011, 06:25:40 AM: Quote from: jezyg on October 04, 2011, 08:09:27 PM
Yep 2010+ models come with unrestricted CDi so no need to cut.

Oh so it's normal to have oil in it? Now I cleaned it out and I have gas in it now???

Thanks for the Cdi vid
Title: Re: How exactly do you do the CDI mod?
Post by: streido on October 05, 2011, 07:09:06 AM: No its not normal to have oil in the airbox. I had this problem a few months ago and it was down to having slightly too much oil in the engine. It has been fine since i took some out. The small clear hose under the airbox had oil in it too.
Title: Re: How exactly do you do the CDI mod?
Post by: woodcutter on October 05, 2011, 11:05:32 AM: Yes, it's normal and vital to have oil in air box. When engine is near to overheating, oil is starting to evaporate and in form of mist is going through cranksace breather to air box where it's being mixed with air and sucked into the engine where it cools down the piston and cylinder. I was reading 'bout it and noticed on cold weather my oil level is where I left it and on hot days and stop and go city driving up to 2-3 mm down on 50 km ride.
Title: Re: How exactly do you do the CDI mod?
Post by: streido on October 05, 2011, 11:15:35 AM: Oh well, if woodcutter is correct then i stand corrected. :-X

Mine has been fine and has no oil now my engine level is at the correct level. When i had it slightly too high then the excess was coming thro the breather i think into the filter. Now it doesnt.
Title: Re: How exactly do you do the CDI mod?
Post by: woodcutter on October 05, 2011, 11:20:35 AM: it's reason I don't like free flow air filters. kymco engineers did a good job.
and yes, it's also oil overfill prevention
our kymco's are preventing our mistakes ;D
Title: Re: How exactly do you do the CDI mod?
Post by: woodcutter on October 05, 2011, 11:33:00 AM: once I put some duct tape over re-circulation hole and left clear tube opened and guess what?
my engine was overheating and cutting itself ;D