KymcoForum.com

Scooters - 50cc => Agility 50 => Topic started by: EcafRuoy on September 26, 2011, 05:48:59 PM

Title: Off to derestrict my 09 Agilty 50
Post by: EcafRuoy on September 26, 2011, 05:48:59 PM

BOSS
82 port
New Rear Tire
http://www.monsterscooterparts.com/kymco-130-70-12-tire.html (http://www.monsterscooterparts.com/kymco-130-70-12-tire.html) (took a wood screw to the original)
and maybe a CDI cut job.... not sure yet... spare is $25+s/h

changin oils

hit 800KM on the bike this morning started at 5KM about a month+ ago

My previous speeds on the commute I purchased the scoot for:
GPS Verified
AVG moving speed = 28mph
Max Speed = 32mph (small hill)

Title: re: my lil" red demon
Post by: sidthesloth on September 26, 2011, 11:07:45 PM

Let us know how the speed goes after thdm drive boss mod and main jet change if you can, this will answer my earlier question on another thread.

Title: Re: Off to derestrict my 09 Agilty 50
Post by: EcafRuoy on September 28, 2011, 01:10:05 PM

GPS Verified
AVG Moving Speed = 35
Max Speed = 39

no cdi cut yet

Title: Re: Off to derestrict my 09 Agilty 50
Post by: streido on September 29, 2011, 04:05:26 PM

I did the cdi cut 1st when i did my scoot, think it gave 2-3mph gain so that would get you over 40mph.  ;D

Title: Re: Off to derestrict my 09 Agilty 50
Post by: Drnilly007 on October 11, 2011, 06:04:53 AM

Just did Cdi cut, huge difference, faster acceleration and about 33 top speed instead of 30. Although if I go full throttle it makes a "grinding" noise. So I lay off the throttle a bit. Have the boss coming thus week so I'll see how that goes.