KymcoForum.com

Scooters - 50cc => Agility 50 => Topic started by: Mrperfektone on September 25, 2011, 07:07:08 PM

Title: Agility Exhaust model question ?
Post by: Mrperfektone on September 25, 2011, 07:07:08 PM

Will it fit in agility?

http://www.ebay.de/itm/Auspuff-STANDART-GY6-50ccm-4-Takt-Jmstar-Jonway-Karcher-Kinroad-Lingben-Mawi-/220854078222?pt=Motorrad_Kraftradteile&hash=item336bedcb0e#ht_1725wt_1140 (http://www.ebay.de/itm/Auspuff-STANDART-GY6-50ccm-4-Takt-Jmstar-Jonway-Karcher-Kinroad-Lingben-Mawi-/220854078222?pt=Motorrad_Kraftradteile&hash=item336bedcb0e#ht_1725wt_1140)


I can see agility are not on the list of models exhaust fit but it's the same engine block at all so it should fit: S? - The only difference I can see is that there is not the holder for the rear fender on this exhaust? : S Missing help: D!

Regards Rene

Title: Re: Agility Exhaust model question ?
Post by: jezyg on September 25, 2011, 08:32:28 PM

Yep that will fit an agility can see the top mount that attaches to the lower part of the rear fender/engine block, has the Chrome heat shield instead of the matt black shield.

Title: Re: Agility Exhaust model question ?
Post by: zombie on September 27, 2011, 12:15:30 AM

Look close at the bends in the pipe. See all the Kinks/Wrinkles? That is soda can quality pipe, and will not last 1 year. Spend a few more pesos, and buy a better pipe.    http://gy6-performance.fr/echappement-sport-kymco-agility-p-412.html (http://gy6-performance.fr/echappement-sport-kymco-agility-p-412.html)    Just an example of a better quality/gauge pipe

Title: Re: Agility Exhaust model question ?
Post by: Mrperfektone on September 28, 2011, 08:10:25 PM

It's too late now that I have purchased and installed it:) - I may switch to a better when it goes for about a year as you say;) ... - It should be mentioned that it did not fit 100% Kymco agility if others would be tempted. I was forced to change the hanger at the top but it was not a big problem if you have access to a welder and hotpaint after:) ... - I havede obviously not expecting to have to weld in it but I was not interested in having to send it back to Germany from Denmark:)


-Rene

Title: Re: Agility Exhaust model question ?
Post by: zombie on September 29, 2011, 11:49:40 PM

Cool    Good luck.

Title: Re: Agility Exhaust model question ?
Post by: Kenho21 on September 30, 2011, 02:01:42 AM

How's does it sound and run?

Title: Re: Agility Exhaust model question ?
Post by: Mrperfektone on September 30, 2011, 05:43:20 PM

It runs nice and silent :) ... - Good exhaust :)