KymcoForum.com
Scooters - 50cc => Agility 50 => Topic started by: Mrperfektone on September 10, 2011, 05:53:05 AM
-
Hello:) ...
I have to mount the alarm on my Kymco agility but does anyone know if there is an original connector on the wiring network I can set it to?
Thanks in advance
Rene
-
mmmmmmm not sure on that one. But I would say not worth it. just buy a big chain and lock the stearing.or chain your dog to the scoot. ;D
-
I pulled out a mercury switch out of an old thermostat, gonna mount it under the seat at an angle that will put it level when bike is tilted on the kickstand. Armed by a toggle switch and powered by a 9V wired to a small alarm siren.
If the bike is stood up off the kickstand, all hell will break loose.
Beware mercury
-
I pulled out a mercury switch out of an old thermostat, gonna mount it under the seat at an angle that will put it level when bike is tilted on the kickstand. Armed by a toggle switch and powered by a 9V wired to a small alarm siren.
If the bike is stood up off the kickstand, all hell will break loose.
Beware mercury
wow man thats a cool Idea.can you hook that up to your horn on the scoot.
-
wow man thats a cool Idea.can you hook that up to your horn on the scoot.
the horn would be getting no power from the 12v bike battery when key isn't in it (I don't want to rewire the bike). But you can put a big ass alarm horn in place of my siren idea and just up the battery size running through Hg switch.