KymcoForum.com

General => Technical | How To => Topic started by: Bus Man on September 02, 2011, 04:01:28 PM

Title: Adjust Oil injector on ZX 50
Post by: Bus Man on September 02, 2011, 04:01:28 PM

I'm fairly new to my ZX 50 scooter and need to know how to adjust the oil injection. The manual talks about marks where the cable is attached. I see three points in the casting on the lower part but no marks on the disk like part that moves unless what I think is a 1 with other numbers is an arrow. Can anyone explain it to me.   Bus Man

Title: Re: Adjust Oil injector on ZX 50
Post by: thebatman on September 04, 2011, 12:55:10 PM

Hey man, that "disc like part" has a "arrow" of sorts on the lower side. There are 2 casting marks on the bottom section. You want the arrow in between those 2 lines

Title: Re: Adjust Oil injector on ZX 50
Post by: Bus Man on September 06, 2011, 01:56:00 PM

You say the arrow is on the lower side.  Do you mean on the tab that goes down the side?  I'm looking from the top with just the seat and storage compartment removed so I can't see from the side.  I do see the casting marks.  Thanks              Bus Man

Title: Re: Adjust Oil injector on ZX 50
Post by: thebatman on September 06, 2011, 03:25:59 PM

Hope my terms helped you out. Its easy to see once you see it... :D..
The "disc thing" (the oil cable hooks to it)has the arrow on it

Title: Re: Adjust Oil injector on ZX 50
Post by: Bus Man on September 14, 2011, 04:49:03 PM

Thanks for the help, I'll take another look when I get time.