KymcoForum.com
Scooters - Big Bore => Xciting 500 => Topic started by: JustWantToRide on August 24, 2011, 05:00:37 AM
-
The seat latch on the left side won't latch when closing the seat. I haven't pulled the seat pan yet to look at it - but was wondering if there is a way to adjust the cable tension on the release for that side?
With the seat open I can latch the left and then the right - but if I try to latch the right and then the left - then the left will not latch. Also - when releasing - the left releases first. It seems to me as though I just need to adjust the tension on the cable for the left side - but I can't open it up tonight so I thought I'd ask if this sounds familiar.
Thanks.
-
Sometimes, if I've had my seat off for service, my latches are tempermental. I believe it's a seat alignment problem in my case. I can always get them to work by mashing down harder though. :D
-
Tried that, tried pushing only on the left side, tried cursing out of the left side of my mouth... ;)
-
There is a rudimentary cable adjuster under the "bucket". I loosened the left one a bit and that fixed it.