KymcoForum.com

Scooters - 50cc => People 50 => Topic started by: GM6969 on July 21, 2011, 09:34:52 PM

Title: clutch problem...?
Post by: GM6969 on July 21, 2011, 09:34:52 PM

Hello to all,

can you suggest give me ideas, how to understand if clutch is broken?
Seems like a have this problem, but not 100% sure.

Thank you in advance.

Gallo

Title: Re: clutch problem...?
Post by: streido on July 23, 2011, 11:19:55 PM

Probably best to 1st open up the cvt cover and take the bell housing off to remove the clutch assembly and have a look at it. Make sure you have some depth left on the clutch pads and check no springs are broken or loose. Also give a clean out if its dirty inside.

If the clutch looks ok it may just be dirt in it and a good clean can fix it.

Title: Re: clutch problem...?
Post by: GM6969 on July 25, 2011, 10:59:16 AM

Quote from: streido on July 23, 2011, 11:19:55 PM

Probably best to 1st open up the cvt cover and take the bell housing off to remove the clutch assembly and have a look at it. Make sure you have some depth left on the clutch pads and check no springs are broken or loose. Also give a clean out if its dirty inside.

If the clutch looks ok it may just be dirt in it and a good clean can fix it.

yes, good idea to clean up, will look on the weekend.
Thank you1

Title: Re: clutch problem...?
Post by: streido on July 25, 2011, 01:31:36 PM

My clutch was not fully dis-engaging when I stopped at lights etc a while ago. I took it apart and cleaned it up and it worked fine after that. Hopefully it may work for you too.

Title: Re: clutch problem...?
Post by: GM6969 on July 27, 2011, 09:09:29 PM

Quote from: streido on July 25, 2011, 01:31:36 PM

My clutch was not fully dis-engaging when I stopped at lights etc a while ago. I took it apart and cleaned it up and it worked fine after that. Hopefully it may work for you too.

Thank you, I will try to open all the vario side tomorrow.