KymcoForum.com

General => General Discussion => Topic started by: fezza612 on July 19, 2011, 06:48:04 PM

Title: hello and help!
Post by: fezza612 on July 19, 2011, 06:48:04 PM

hi i just joined here, i ride a kymco pulsar 125 it's in a bit of a state but thats another story  ::) anyway i'm having problems with it at the moment and i've been told to check the valve clearences but i don't know what they're supposed to be does anybody know?

thanks, dan

Title: Re: hello and help!
Post by: streido on July 19, 2011, 09:33:56 PM

Welcome Dan. If you try searching in the search tab for manuals you hopefullyshould find a link for one for your scoot. If not try the scribld website, thats where I found one for my Agility 50. If you get the manual it will tell you your gaps in there, and its handy to have anyway for everyrhing else too.

Good luck.

Title: Re: hello and help!
Post by: old geezer on July 19, 2011, 09:58:08 PM

Most of them are set on 0.12mm for intake and exhaust. thats .004 for us old Americans.

Title: Re: hello and help!
Post by: JENNY on July 22, 2011, 04:45:51 PM

Check while cold in mm .12 for intake and exhaust

jenny