KymcoForum.com

Scooters - 50cc => Agility 50 => Topic started by: scottmiller771 on July 09, 2011, 01:55:44 AM

Title: CDI identification help
Post by: scottmiller771 on July 09, 2011, 01:55:44 AM

I have a 2010 Agility and I am looking at upgrading the CDI to a unrestricted one but have found there are two types A/C and D/C.
Can any one help me identify what type mine is.

Title: Re: CDI identification help
Post by: Kenho21 on July 09, 2011, 04:30:15 AM

I would just cut the CDI from what I know it is just the same. You can find threads all over this forum on how to do it.  But your CDI is D/C...

Title: Re: CDI identification help
Post by: sidthesloth on July 09, 2011, 05:42:04 AM

I am not sure but, I have read on these forums that the 2010 model has a different cdi.

Title: Re: CDI identification help
Post by: scottmiller771 on July 09, 2011, 07:06:38 AM

Thank you for the replies.
 I don't want to mess with the factory CDI I would like to put it back to standard if I went to sell the scooter.

Title: Re: CDI identification help
Post by: woodcutter on July 09, 2011, 10:08:06 AM

I have 2010 agility and cdi de-restriction procedure is the same as on any other model year. Standard cut at the back of the cdi.
Also, you can buy standard oem kymco cdi and de restrict original one. It's cheaper than buying quality aftermarket with no rev limiter.

And I'm not sure, but complete ignition system works on A.C. current. Service manual says that.


 

Title: Re: CDI identification help
Post by: woodcutter on July 09, 2011, 10:14:52 AM

My bad.
It seems that kymco uses D.C. cdi. Ignition system is A.C. but it's beeing converted to D.C.

http://sherrillbrown.com/4830/electrical-scooter-parts-replacing-a-cdi-module/ (http://sherrillbrown.com/4830/electrical-scooter-parts-replacing-a-cdi-module/)



Sorry again!