KymcoForum.com
Scooters - 125 to 300 => Agility 125 => Topic started by: hatto015 on July 07, 2011, 08:59:56 PM
-
I was driving home on my agility 125, when suddenly the scooter started sounding as if it had no muffler on it. The scooter didn't drive any different then having a notably louder exhaust.
After inspecting the exhaust system, I found a threaded tab just prior to the muffler, and exhaust was leaving this.
I will add a photo later.
Is there suppose to be a cap or screw there? or should i bring it in to my dealership.
-
Yes, there is a hex-headed cap screw on a little pipe "extension" about three inches before the muffler starts. It is probably a standard metric size - my guess is 6mm. You could buy an assortment of screws at a hardware store cheap and see which one fits.
-
Yes, there is a hex-headed cap screw on a little pipe "extension" about three inches before the muffler starts. It is probably a standard metric size - my guess is 6mm. You could buy an assortment of screws at a hardware store cheap and see which one fits.
Why is that thing there anyway?
-
i have wandered the same thing. Why is that little screw there? Unless its for checking back pressure?
-
i have wandered the same thing. Why is that little screw there? Unless its for checking back pressure?
Maybe it's the "loud button", for riding in traffic.
;)