KymcoForum.com

General => Technical | How To => Topic started by: rperry on July 07, 2011, 03:09:16 PM

Title: Standard weight of sliders in variator 2009 super 8 150
Post by: rperry on July 07, 2011, 03:09:16 PM

Hi help how much do factory stock sliders or rollers weigh on 2009 Kymco Super 8 150.

The answer seems to be 12g anybody disagree ?.

I went ahead and put in Dr Pullet Sliders, Dr Pulley 12 g Slider weights.
Clutch arm springs, 3 yellow and Main Clutch big spring yellow.

Let you know how it turns out.

Boy the first thing i notice is the smoothness of the clutch engaging. It feels silky smooth.
I will report on the variator when i drive cross town tomorrow. A good upgrade for the money so far ?.

Title: Re: Standard weight of sliders in variator 2009 super 8 150
Post by: bucky639 on July 07, 2011, 04:19:21 PM

I don't know.

Take 'em out and weigh 'em then let us know.

Title: Re: Standard weight of sliders in variator 2009 super 8 150
Post by: Kevin on July 25, 2011, 05:29:33 PM

Hey rperry,

Any update on the performance? Better top speed or acceleration?
Did you weigh your original rollers?

Thanks!
--kevin

Title: Re: Standard weight of sliders in variator 2009 super 8 150
Post by: old mod on July 25, 2011, 09:05:13 PM

I know the standard weight for the Agility city r16 (kL25B engine, Super 8 125 is KL25, Super 8 150 is KL30) are 13g, i imagine they are the same.

Title: Re: Standard weight of sliders in variator 2009 super 8 150
Post by: rperry on July 25, 2011, 09:09:38 PM

Hi Kevin
Replaced with yellow, the Clutch Main Spring. Three Clutch Arm Springs.
3 Sliders and Weights in variator. 12 gram was what i took out and 12 gram was what i replaced. I used DR Pulley.
Top Speed is 65 on the speedo on the scooter. I was in 55 mph traffic and catching them easily.

Title: Re: Standard weight of sliders in variator 2009 super 8 150
Post by: rperry on July 25, 2011, 09:15:58 PM

Hi the weights just don't cost that much, so i went with the standard 12 gram. I feel it smoothed everything up. Take off mid range and pickup. I was happy with the results. I am mostly in 45 mph traffic, occasionally into 55 mph traffic.
If i wanted a faster machine i would have bought a bigger sized scooter. A Super 8 150 is good value for the money.

Title: Re: Standard weight of sliders in variator 2009 super 8 150
Post by: rperry on July 25, 2011, 09:23:24 PM

Hi sorry i almost forgot ?. There seems to be some belt slap at certain times of acceleration. I took the cover off and watched. The belt where it feeds out of the variator, on the bottom slaps a bit. I guess it is the bigger clutch spring making it a bit harder to open the clutch pulley up. So i think the belt is a little loose on the outfeed from the variator.
Any thoughts on the matter ?.

Title: Re: Standard weight of sliders in variator 2009 super 8 150
Post by: old mod on July 25, 2011, 09:44:47 PM

It's quite normal for the belt to slap around, when it's not under tension. If you're not happy with it you could fit a kevlar belt but the size is critical, a bit small and it will snap!