KymcoForum.com
General => Technical | How To => Topic started by: warmitup on June 23, 2011, 10:52:48 PM
-
First off, I recently purchased my first scooter! '09 Agility 125. I only use it for back n forth to work. My trailblazer SS at 11mpg wasn't cutting it anymore, so now it sits. I LOVE this little thing!
I felt an exhaust leak from under the bike. Im guessing where the pipe meets the manifold? Are these holes supposed to be there as a form of relief or something? The thing is starting to run a little goofy and before I take it to the dealership, I figured I'd get some advice from the pros on this site! Thanks for all the help!
(http://img.photobucket.com/albums/v329/vdubbs78/CIMG0261.jpg)
(http://img.photobucket.com/albums/v329/vdubbs78/CIMG0257.jpg)
-
It does look like something is not right there, possibly a bad weld. Have you checked the 2 exhaust bolts to make sure they are tight? On my P150, they tend to come lose so I check them at every oil change. Good luck!
-
Yes, the welds are leaking, can be rewelded.
-
it seems to me that kymco is crying..... :'(