KymcoForum.com

General => Technical | How To => Topic started by: Dale4 on May 28, 2011, 10:02:16 PM

Title: Running lean
Post by: Dale4 on May 28, 2011, 10:02:16 PM

  My Agility 50 is running lean since I replaced my roller weights and drive boss ( it has a #82 jet). I'm taking it to get inspected and I'll have them adjust the carb. Will I get more speed by them adjusting the carb? Now I struggle to get 38 mph and feel it should do better. TY

Title: Re: Running lean
Post by: marioG on May 29, 2011, 10:35:49 AM

think 50-55----

cut cdi, lean - try bigger jet 2-3 size

Title: Re: Running lean
Post by: Dale4 on May 29, 2011, 12:06:13 PM

  I should have mentioned my cdi is cut,but by it running lean will that cause it to lose speed? I use quality gas and have an iridium plug too,I am just trying to figure out why I can't get 45 mph with all I've done like everyone else claims to. Will running lean cause it to lose speed?  Thanks

Title: Re: Running lean
Post by: marioG on May 29, 2011, 05:20:29 PM

running lean can cause damage to ur piston and block...can overheat....dont try that...read plug...

think 88 could do the trick..

but, jetting is long dull job.....

if plug is really white try 86, 88....open air filter...

did u replace weights with lighter or the same?

Title: Re: Running lean
Post by: Dale4 on May 30, 2011, 12:25:18 PM

I replaced my 6.5 rollers with 5.5. But my real question is,will running lean cause my scooter to go a bit slower? I'm gonna have the shop adjust my carb and was wondering if I will gain a bit of power with the adjustment.  TY

Title: Re: Running lean
Post by: marioG on May 30, 2011, 07:30:29 PM

yes...
adjust carb....