KymcoForum.com
Scooters - 125 to 300 => Agility 125 => Topic started by: docjones on April 18, 2011, 07:09:17 PM
-
What does this entail? Removing the bowl, cleaning the jets? What else? I am going to be doing this on an Agility 50. I assume it would be the same for both. I'm hoping all those damn hose/tubes will plug into the same spots as I will be looking at my A125 as a guide. I'm assume the carbs are different sizes but will be the same in everything else. By the way I'm buying a used 09 A50 that has been sitting in a garage for over a year with, you guessed it, gas in it and no seafoam.
-
You've about got it. Pull out all the jets and clean everything VERY thoroughly.
-
What does this entail? Removing the bowl, cleaning the jets? What else? I am going to be doing this on an Agility 50. I assume it would be the same for both. I'm hoping all those damn hose/tubes will plug into the same spots as I will be looking at my A125 as a guide. I'm assume the carbs are different sizes but will be the same in everything else. By the way I'm buying a used 09 A50 that has been sitting in a garage for over a year with, you guessed it, gas in it and no seafoam.
I haven't done this myself, but you can't have a better 'guide' then the 125.. they're virtually the same,
and also the 150cc (all GY6 engines).
-
Take a look at this Carb cleaning tool - it may be of use to you... http://www.ebay.co.uk/itm/160943325772?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1586.l2649 (http://www.ebay.co.uk/itm/160943325772?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1586.l2649)