KymcoForum.com

General => Technical | How To => Topic started by: tony55 on April 05, 2011, 08:39:24 PM

Title: help to remove face plate
Post by: tony55 on April 05, 2011, 08:39:24 PM

Please can anyone help??????? I have a kymco super 9 that only goes 30 mph i have purchased the new smooth bush to increase speed.I removed the kick start then the cover then the nut and 3 pronged washer.....but cannot remove the face plate due to i think spline damage.....can anyone help i am desperate!

Title: Re: help to remove face plate
Post by: codger78 on April 05, 2011, 09:30:58 PM

tony55.....As you sent me an email directly, I will respond.
I am sorry to say that I can't help you with your problem.  There are a number of other members on this forum that are expert with such helpful advice and I hope that they can be of some service to you.
....Good luck

Title: Re: help to remove face plate
Post by: blue on April 07, 2011, 01:20:02 AM

IF YOU CAN GET HOLD OF A IMPACT THAT WELL HELP. If not do a search on the fourm I know I had on here some wear. and also you can google it youtube has a video that well help its about takeing a openend wrench and a socket it works I do it all the time. pretty cool .

Title: re: looking for help, please! having bogging issues with zx50
Post by: sidthesloth on April 07, 2011, 05:08:21 AM

Is it spline damage or some threadlock holding the drive face on? Once you have the nut off, you should be able to pull the drive face off. It may just be a little stubborn.

Title: Re: help to remove face plate
Post by: marioG on April 25, 2011, 05:04:02 AM

u need locking device.....need to lock spinning...

but after that u need to screw nut at wright force....

buy wrench or impact....

Title: Re: help to remove face plate
Post by: Peters on May 04, 2011, 11:53:10 PM

Sounds like he got the nut off. If you have the nut removed an impact wrench wouldn't help. You need a three jaw pully puller. Or a two jaw doesn't matter. Any medium puller tool would work