KymcoForum.com

General => Technical | How To => Topic started by: blue on March 18, 2011, 01:27:02 AM

Title: carb
Post by: blue on March 18, 2011, 01:27:02 AM

what would make to much gas come out the over flow.on a gy6 50 carb.is it that the float is sticking.

Title: Re: carb
Post by: sidthesloth on March 18, 2011, 01:41:14 AM

Yep, or a bit of gunk stopping the needle valve from closing properly.

Title: Re: carb
Post by: blue on March 18, 2011, 01:48:57 AM

the needle under the rubber diaphragm if that sticks it that right.

Title: Re: carb
Post by: sidthesloth on March 18, 2011, 09:31:37 AM

I was actually refering to the needle and seat, the valve that the float operates.

Title: Re: carb
Post by: blue on March 18, 2011, 10:10:50 PM

ok thanks guess ill tear in to the carb.