KymcoForum.com
Motorcycles => Venox 250 => Topic started by: adri on January 20, 2011, 06:28:20 PM
-
Hey guys, posted up a page last week on how to do an oil change. Includes pictures to make it really easy for you. Also talks about what oil to use.
KYMCO Venox Oil Change (http://www.youmotorcycle.com/kymco-venox-oil-change.html)
If you guys have any thoughts/feedback please let me know?
-
Great work
Thanks for the tutorial :D
Making anymore? -How to check coolant and perform a coolant flush :D
-
How about how to do a Carb cleaning? :)
-
Got your hands full now Adri. That's the sort of post thats needed. How To's!
-
dont do a carb clean unless you have the tools. at the end of a clean you will need vacumm gauge to balance the cylinders and adjust the idle mixture screw. you may strip and clean the carb. but after that take it to a garage to get the carbs balanced. cleaning and striping on your own is easy, take it apart slowly and remember where everything goes. use compress air and carb cleaner, remember to take off the diaphragm before you start to use the carb cleaner. spray every hole you can find and use compress air to clean and blow away any clog together with the carb cleaner. do not touch the air cunt off valve... no need to clean that part, and it is a little bit tricky to put that part together.
-
I thoughght he said 'air cutoff' diaphragm, but I have an ear infuction, and I cunt hear very well.
It's a decceleration valve with a vac line to it on top of the carb, it lets the engine slow down as you let off throttle.
-
sorry guys bad spelling! but that thing is tricky! stay away!