KymcoForum.com

General => Technical | How To => Topic started by: Stig / Major Tom on July 26, 2025, 09:04:08 PM

Title: an easy install!, even for Stig
Post by: Stig / Major Tom on July 26, 2025, 09:04:08 PM

I ran a new bolt through the old threads on the old mirror adapter on my LIKE200i - cleaning things up and then spun the new mirror in. Snugged up the locking nut.
Sprayed it all with ACF-50 - and slid the rubber protective cup down.

(https://i.postimg.cc/XvK0p1mt/mi3.jpg)

(https://i.postimg.cc/sx7LNMzq/mi2.jpg)

(https://i.postimg.cc/XNsBrs0Z/mir.jpg)


Took me a little longer to get to this - much stuff on my plate - then the garage turned into an Easy-Bake oven when that mid-west heat dome settled over us. It was impressively oppressive outdoors and on pre-heat in the garage!
(https://i.postimg.cc/JnCGWJ8Q/heat.jpg)

easy-peazy

Stig

FYI: after my purchase from Germany - I stumbled on the original seller who sold me this set of FAR mirrors over a decade ago. His price is much better - and so is the postage. Again, he was very helpful and knowledgeable in advising me which bits I'd need in order to fit these mirrors to my LIKE.
www.moto-science.com

Title: Re: an easy install!, even for Stig
Post by: Neil955i on July 28, 2025, 02:05:42 PM

Good job Stig.

Title: Re: an easy install!, even for Stig
Post by: Ruffus on October 14, 2025, 04:06:17 PM

Stig have you been counceling this guy about mirrors??
(pls see pics)

Title: Re: an easy install!, even for Stig
Post by: Neil955i on October 15, 2025, 07:58:24 AM

 ;D