KymcoForum.com
Scooters - Big Bore => Xciting 500 => Topic started by: wymple on July 11, 2025, 08:31:20 PM
-
I had my fuel pump go out several years ago on my fuel injected 2010. I bought one off the net from Italy, and it would not pump enough pressure to meet the minimum requirement, which I think is 45 lbs. So I gave up & paid the bill to have a dealer in Iowa City get one from Kymco. They had zero communication, no idea when it would show up or where it was at. It took about 6 weeks. I hated that. Does anybody have a reliable source for one?
-
This is where I usually buy fuel pumps
.amazon.it , they are inexpensive, fit perfectely and work without flaws..
2.7 - 3.0 bar are enough when you test it by using starter motor only, no running or revving..
..with idling motor and bypass tester between 3.0 and 3.5 bar..
Pls see pics....
-
Wonderful..!! Thank you very much..!!
-
So I searched for a couple of hours, & I'm not getting results. I get currently unavailable, does not ship to the United States, or overlapping years that can't be correct. Some say 2007-2013 or 2014. They are not the same. None of them list the operating pressures. Do you have a more direct link to one that fits a 2010 and pumps over 3 bars?
-
Well, checked up on my source here in Italy, they have it available, though non of them lists operating pressure rate. Easy to check with a manometer.
Fuel pumps same year for XC 250, XC 300 and XC 500 are ident.
Yours is a 2010 and falls into 2009 - 2013 even I didn't see a different one on other year models.
-
Yeah, that's strange as I see quite a few ads for the XC300. I should be good to go then. Thank you.