KymcoForum.com

General => Technical | How To => Topic started by: Dahlia43 on May 16, 2025, 10:42:36 PM

Title: That Exhaust!
Post by: Dahlia43 on May 16, 2025, 10:42:36 PM

Does anyone have a great in depth simple video on how to put on a new exhaust pipe for a people s 200?

Thank You!

Title: Re: That Exhaust!
Post by: mrmike on May 18, 2025, 09:55:29 AM

Quote from: Dahlia43 on May 16, 2025, 10:42:36 PM

Does anyone have a great in depth simple video on how to put on a new exhaust pipe for a people s 200?

Thank You!

Do yourself a favor and purchase a Cyclepedia for your People S. They are very informative with plenty of pictures. Also check on You Tube. You will find plenty of videos on your People 200 there!

Title: Re: That Exhaust!
Post by: Iahawk on May 18, 2025, 01:37:07 PM

not a video but pics of removal in 'my rear wheel removal' sticky in the S200 section. 2 12 mm bolts where the pipe bolts to the header and 2 more 12mm  bolts where the exhaust hanger bolts to the scoot. Simple to remove, sometimes a bit tricky to line back up for installation. When you remove and replace your exhaust it's a good idea to also replace the exhaust gasket (where pipe meets head).

Are you replacing the exhaust with an aftermarket?

Title: Re: That Exhaust!
Post by: Stig / Major Tom on May 18, 2025, 04:16:51 PM

+1 on replacing the exhaust gasket.
Many sizes of ebay.
Sometimes the old gasket stays within the engine, so you have to look. Pull it out.
Stig