KymcoForum.com

Scooters - 125 to 300 => Agility 125 => Topic started by: scooterfan on January 28, 2025, 01:53:11 PM

Title: Agility 125 - How to remove rear Side Panels ?
Post by: scooterfan on January 28, 2025, 01:53:11 PM

Does anyone know how to remove the side panels at the rear at an Agility 125 ?

I have removed two screws at the front (inside the engine bay) and two screws under the panels at the outside but the covers are still stuck to the body.

Any advice will be appreciated !

Title: Re: Agility 125 - How to remove rear Side Panels ?
Post by: Stig / Major Tom on January 28, 2025, 05:53:41 PM

Sometimes an exploded parts diagram can show where fasteners are.
If I don't see a fastener (screw or one of those black plastic push-rivets) aimed at the part I'll assume it is a body clip?

Stig

Title: Re: Agility 125 - How to remove rear Side Panels ?
Post by: Iahawk on January 29, 2025, 02:45:21 AM

Link should work to Leesons Arctic Cat Kymco parts site. Exploded view of body panels. Maybe it will make more sense to you..?

https://www.leesonsarcticcat.com/OEMpartfinder#/Kymco_USA/KN25SA_Agility_125/Body_Cover_%26_Luggage_Box/2K03040005/2K03040053/y

Title: Re: Agility 125 - How to remove rear Side Panels ?
Post by: scooterfan on January 29, 2025, 05:52:17 PM

@ Stig and Iahawk.

Thanks for your advice. According to the drawings it looks like  I've missed the two screws at the rear -I should have acess to the screws by removing the tail light.
Thanks again !