KymcoForum.com

Offroad => Mongoose => Topic started by: clouty on January 07, 2011, 07:41:56 PM

Title: kymco maxxer 300 ATV /mongoose
Post by: clouty on January 07, 2011, 07:41:56 PM

Hi i really cant find any after market parts for me bike want some heavier roller clutch wights bigger front sprocket is there not just a site some where on this Internet that i can just browse through and find bits

Title: Re: kymco maxxer 300 ATV /mongoose
Post by: Rianna on January 09, 2011, 12:33:11 AM

Hi, clouty!

Welcome to the forum!! ;D

Umm...do you have a bike or an ATV??

Title: Re: kymco maxxer 300 ATV /mongoose
Post by: clouty on January 09, 2011, 09:42:06 PM

hi thanks for the reply

iv got a kymco maxxer 300 atv :) just finding it really hard to find add on parts for it

Title: Re: kymco maxxer 300 ATV /mongoose
Post by: Zootqq on February 16, 2011, 02:57:02 PM

For clutch and rollers, try Dr. Pulley - better launch and higher top end.

I have used Dr. Pulley on my MP3 Piaggio as well as my Maxxer 250 with great results.

http://www.unionmaterial.com/rollerweight6.htm (http://www.unionmaterial.com/rollerweight6.htm)

As to clutch, unless there is something wrong with it, there is little reason to change it - it doesn't give you any performance benefit.

Tuning it is another matter - to either increase revs before take-up or to speed up 'grab'. You can do it with the stock clutch by playing with the springs, but if you must change it, again, Dr. Pulley makes a decent aftermarket tunable clutch for the Kymco.