KymcoForum.com

Scooters - 125 to 300 => Agility 125 => Topic started by: b dippin on September 16, 2024, 09:34:57 PM

Title: Possible battery ground?
Post by: b dippin on September 16, 2024, 09:34:57 PM

Have a 2012 kymco agility 125 and did a gy6 motor swap 8 years ago. Just starting to finish this motor swap again and trying to find out where this wire attaches. Its routed with the main wire harness towards the engine. I think it's the main ground wire but not sure.. pics attached

Title: Re: Possible battery ground?
Post by: b dippin on September 17, 2024, 03:37:04 AM

I got it... was the main ground and ran to a starter bolt. I see 50cc mopeds run to valve cover bolts but it appears by the way the wire loom was run it was probably the starter bolts over valve cover bolts... let me know if I'm wrong on this..

Title: Re: Possible battery ground?
Post by: Ruffus on September 17, 2024, 12:16:17 PM

Yes its the main ground and is to be bolted to the motorbloc close to the startermotor with a 6mm screw.

Pls see link

https://www.kymcoforum.com/index.php?topic=31637.msg221509#msg221509

Title: Re: Possible battery ground?
Post by: b dippin on September 17, 2024, 01:01:02 PM

Quote from: Ruffus on September 17, 2024, 12:16:17 PM

Yes its the main ground and is to be bolted to the motorbloc close to the startermotor with a 6mm screw.

Pls see link

https://www.kymcoforum.com/index.php?topic=31637.msg221509#msg221509

Thank you for the confirmation!!!!