KymcoForum.com

Scooters - 50cc => Super 9 => Topic started by: mudfreek on December 12, 2010, 09:45:18 PM

Title: anyone know
Post by: mudfreek on December 12, 2010, 09:45:18 PM

anyone know where i can get a rear disk setup for a 2008 super  9 and what exactly i would need to change on the bike

Title: Re: anyone know
Post by: lankeeyankee on December 12, 2010, 11:39:05 PM

Have you done a search on google? How about a 2009 model do they use a rear disc setup? If so why not get a 2009 swingarm, rear wheel, caliper and rotor? I would keep an eye out on ebay.

Title: Re: anyone know
Post by: sparko on December 13, 2010, 03:22:01 PM

My 2009 super 9 ac has no disc brake setup for the rear wheel.  Drum brake that is pretty useless. Then again, the front brake isn't all that great either. So a better back brake would be excellent. I will be watching for any replies on this one as I wouldn't mind a decent brake setup myself. Mudfreek, let us know if you find anthing.

Title: Re: anyone know
Post by: mudfreek on December 23, 2010, 12:48:09 AM

i got another question on the super 9s hen u derestrict the cdi will u have the same failer rate as the zx 50 that was my last bike and she finaly died

Title: Re: anyone know
Post by: Areomyst on December 23, 2010, 02:12:27 AM

Rear disc brakes on the AC Super 9 will be a headache. I may be missing a few things, but at a minimum you will need:

LC transmission housing (they are different)
LC gear set
LC rear wheel
LC brake disc
LC brake caliper
LC brake line, master cylinder, brake handle, etc
Swing arm
LC exhaust (AC exhaust is different, because AC model does not have the swingarm.  You could modify the stock exhaust to work though...)

There's probably a few more bits I forgot. 

For the CDI, switching to the LC CDI works great, but you've got to rewire a bunch of stuff to make it work.  Just did  one a few weeks go and it runs like a champ.

Hope that helps some.

~Josh

Title: Re: anyone know
Post by: mudfreek on December 23, 2010, 02:42:45 AM

thanks

Title: Re: anyone know
Post by: mudfreek on December 24, 2010, 12:38:47 PM

as far as the brakes yes but the cdi failer rate after you derestrict it not so much my last kymco was an 04 zx50 and after i bought a new cdi i derestricted it it started to fail almost emedietly

Title: Re: anyone know
Post by: thebatman on December 26, 2010, 03:53:58 AM

I havent had any issues with my cdi on my zx... still the same oem with 22,000kms...hmm ???

Title: Re: anyone know
Post by: mudfreek on February 18, 2011, 11:56:17 AM

ok how do u rewire an lc cdi or just derestict the original  one

Title: Re: anyone know
Post by: thebatman on March 01, 2011, 11:40:39 PM

actually the l.c and a.c cdi is the same one for both.. just derescrict the oem.... ;)

Title: Re: anyone know
Post by: mudfreek on March 26, 2011, 11:00:29 AM

anyone know where i can get a handlebar conversion so i can ditch the factory bars i have only found types for the honda rucus

Title: Re: anyone know
Post by: 0BARK4322 on April 06, 2011, 01:20:20 AM

THE SUPER 9 IS

Title: Re: anyone know
Post by: mudfreek on April 08, 2011, 11:05:07 AM

the super 9 is what?

Title: Re: anyone know
Post by: mudfreek on May 25, 2011, 11:03:43 AM

anyone know where i can get the motorcross handlebar kit for the super 9

Title: Re: anyone know
Post by: thebatman on May 25, 2011, 11:18:04 AM

Check out scootercraft.com
The have a wide variety of conversion parts. ;)