KymcoForum.com

Scooters - 50cc => Agility 50 => Topic started by: netsurfer802B on May 21, 2023, 08:48:45 PM

Title: Rear Tire Needs to be replaced
Post by: netsurfer802B on May 21, 2023, 08:48:45 PM

I have a Kymco Agility 50 with a shredded tire that I've been told by the shop that sold it to me that it's tubeless.

I've gotten the big bolt off that holds the tire in place but now the exhaust pipe is in the way.

I really have no idea what tool to use but I'm attaching a picture of what's holding it in place.

Please advise on what exact tool I need to take this off.

It's completely circular and on the inside it looks like an indent in the shape of a star... please click here to see a pic of it ... https://drive.google.com/file/d/1uSW5FrcW7Gr_HNyy3Kn4GRiu1vA1foeU/view?usp=sharing

Thanks in advanced.

Title: Re: Rear Tire Needs to be replaced
Post by: Stig / Major Tom on May 22, 2023, 12:26:40 AM

(https://i.postimg.cc/mkKYK2N3/TORX.jpg)

That is a TORX-head bolt.
Make sure your TORX tool is firmly seated - do not want to strip the inner/part out of these!
Would not need the whole set if you could figure the size!
Good luck!
Stig


OR THESE
(https://i.postimg.cc/P5TyHNnK/TORX2.jpg)