KymcoForum.com

General => General Discussion => Topic started by: Neil955i on April 07, 2023, 10:18:03 AM

Title: DTX360- It’s that time of year again….
Post by: Neil955i on April 07, 2023, 10:18:03 AM

Do I ride 6m on the wrong time or try to fathom how I change the clock on my new DTX360?  Go to Google has failed me so it’s out with the User Manual 😳

Title: Re: DTX360- It’s that time of year again….
Post by: Neil955i on April 07, 2023, 10:55:38 AM

Easy enough it seems, on RH bar.

“In Odo mode press & hold the down button to select the digits
Press the O button to change the digits
Press the down button to select hours or minutes, they will flash when selected”

I’ll come back and edit if that’s not quite right.

Edit:  Clock adjustment:

Ignition on then in ODO mode, press and hold the DOWN button for a few seconds to adjust the digits. Then:

•   Press the DOWN button to select hour or minute.  The digits will flash as they are selected.
•   Press the O button to change the digits.
•   After change wait c10 seconds for it to set.