KymcoForum.com

Scooters - 125 to 300 => LIKE 200i => Topic started by: Mikiehead on March 18, 2022, 04:47:25 PM

Title: CLEP does not light when Ignition is turned on?
Post by: Mikiehead on March 18, 2022, 04:47:25 PM

Hello and TIA for any trouble shooting Idea's     I have a 2016 Like 200i with only 1400 miles on it.  I was getting it ready for riding season here in Phoenix and although it started, it cranked REALLY slow. So I put my Float Battery charger on overnight.
Now it cranks great, but will not start. I checked the fuses and they are fine. Then I noticed that the CLEP light does not come on when the ignition is turned on. 
Any idea's on what that Can Indicate?

Again, TIA!

Title: Re: CLEP does not light when Ignition is turned on?
Post by: big blue on March 18, 2022, 05:37:53 PM

Hello and welcome, I just went out to check on my 2012 Like to see if this is correct. Is the kill switch in the run position? If it is not the CLEP light does NOT come on. When it is in RUN position it does and the scooter will start. The starter motor will engage in the OFF position but the ECU won't fire the ignition. Check your kill switch!

Title: Re: CLEP does not light when Ignition is turned on?
Post by: CROSSBOLT on March 18, 2022, 06:22:50 PM

Quote from: big blue on March 18, 2022, 05:37:53 PM

Hello and welcome, I just went out to check on my 2012 Like to see if this is correct. Is the kill switch in the run position? If it is not the CLEP light does NOT come on. When it is in RUN position it does and the scooter will start. The starter motor will engage in the OFF position but the ECU won't fire the ignition. Check your kill switch!

That's how you help people! Good show!

Title: Re: CLEP does not light when Ignition is turned on?
Post by: Mikiehead on March 18, 2022, 07:52:46 PM

Quote from: big blue on March 18, 2022, 05:37:53 PM

Hello and welcome, I just went out to check on my 2012 Like to see if this is correct. Is the kill switch in the run position? If it is not the CLEP light does NOT come on. When it is in RUN position it does and the scooter will start. The starter motor will engage in the OFF position but the ECU won't fire the ignition. Check your kill switch!

Yes, I checked and the Kill switch was on. Spring cleaning I think I clicked it. I always use the key to shut it off and forgot the kill switch is a toggle, not a 'momentary' on.....

Operator error, but relieved that my Kymco is ready to go (and even clean!)

Title: Re: CLEP does not light when Ignition is turned on?
Post by: big blue on March 18, 2022, 08:24:19 PM

There you go...

Title: Re: CLEP does not light when Ignition is turned on?
Post by: Stig / Major Tom on March 18, 2022, 08:42:24 PM

Nice work Blue!
There'll be a little something extra in your Xmas card this year🚀

Major Tom

Title: Re: CLEP does not light when Ignition is turned on?
Post by: big blue on March 18, 2022, 09:27:59 PM

Thank you Major!

Title: Re: CLEP does not light when Ignition is turned on?
Post by: Mikiehead on March 18, 2022, 09:39:29 PM

Quote from: big blue on March 18, 2022, 05:37:53 PM

Hello and welcome, I just went out to check on my 2012 Like to see if this is correct. Is the kill switch in the run position? If it is not the CLEP light does NOT come on. When it is in RUN position it does and the scooter will start. The starter motor will engage in the OFF position but the ECU won't fire the ignition. Check your kill switch!

And to say it again, Thank you for taking the time to go check yours.   I think I may go run some errands with mine now!!!!!!!!!!