KymcoForum.com

Scooters - 125 to 300 => Agility 125 => Topic started by: ModMan88 on October 30, 2010, 12:53:10 AM

Title: Taking CrankCase off...
Post by: ModMan88 on October 30, 2010, 12:53:10 AM

I took out all the bolts, but it just wont budge....any ideas on how to get it off?  ???

Title: Re: Taking CrankCase off...
Post by: grazo22 on October 30, 2010, 06:16:43 PM

There is a ring on the crank which you have to take off, it's a reverse thread c-nut. If you are really sure everything is off then a rubber mallet and some welly is all i can suggest

Title: Re: Taking CrankCase off...
Post by: ModMan88 on October 30, 2010, 10:12:40 PM

Where is that located? Is it on the kick start?

Title: Re: Taking CrankCase off...
Post by: grazo22 on November 01, 2010, 07:15:03 PM

it is on the crank shaft its self, if you put a photo up I will be able to help more as I have done this procedure many times.

Title: Re: Taking CrankCase off...
Post by: ModMan88 on November 05, 2010, 10:40:32 PM

I got the case off. Just took a rubber mallet and a paint chisel and on the top right corner just tapped it and it spaced a little bit and then it just pulled off.