KymcoForum.com

General => Technical | How To => Topic started by: oceral on October 03, 2021, 08:35:48 PM

Title: x tovn 250 i engine stalls
Post by: oceral on October 03, 2021, 08:35:48 PM

[all posts removed  by moderator]

Title: Re: x tovn 250 i engine stalls
Post by: Ruffus on October 04, 2021, 06:44:18 PM

@oceral, 
welcome on board (forum), give pls some more information to this case.
Year, km, history, when  does it happen, cold/ warm motor, fuel/filter already changed, last service with CVT tuneup, by whom, as much as possible...

Title: Re: x tovn 250 i engine stalls
Post by: Ruffus on October 04, 2021, 07:09:05 PM

@oceral,
first pls check whether you are still in warranty. IF yes, pls contact your dealer and let them know about this issue. No touching anything within motor compartement if warranty applies.

Since your 250 is an EFI there could be several reasons for stalling
-fuel lines clogged
-fuelpump
-air passage clogged
-sparkplug or ignition cable faulty and thermo-sensitiv
-sparkplug cap simply off...
-one of your switches or cable grounding....
-battery cables loose
-ground cables off or loose
-one fuse or its holder worn out
Pls check as written and give a feedback.

Title: Re: x tovn 250 i engine stalls
Post by: Ruffus on October 04, 2021, 07:54:45 PM

@oceral, I'm not familiar with tbe term "idle motor", maybe something within the scoots electronic. Your technicians should read it out with their diagnostic tool. If it's an electronic flaw then its easy to dedect via diagnostic. Could be one of those sensors on the pic.
Pls keep us posted for other readers too.