KymcoForum.com

General => Technical | How To => Topic started by: xyz on September 27, 2021, 01:52:49 PM

Title: How to remove Tiller Cover of Kymco Agility Mobility Scooter
Post by: xyz on September 27, 2021, 01:52:49 PM

Hi all, after removing all the screws and those plastic insert around the Tiller Cover I still could not remove the Cover to mend the fuse. Am I missing some thing. Is there a sequence to remove the cover. Please help me. Thanks.

Title: Re: How to remove Tiller Cover of Kymco Agility Mobility Scooter
Post by: CROSSBOLT on September 27, 2021, 05:23:36 PM

Don't have one like yours BUT if yours is like the Kymco scooters the plastic fits together tightly with barbed tabs in slots. The handlebar covers on the scoots basically squeeze the bottom in and fingernail pull the top out at the easiest end to start. These tabs are usually 2 to 3 inches apart.

Title: Re: How to remove Tiller Cover of Kymco Agility Mobility Scooter
Post by: big blue on September 27, 2021, 08:55:16 PM

Hello this is procedure for a different model but shows the process quite well....https://www.kymcoforum.com/index.php?topic=29611.0

Title: Re: How to remove Tiller Cover of Kymco Agility Mobility Scooter
Post by: xyz on September 28, 2021, 06:14:36 PM

Many many thanks CROSSBOLT and big blue.
Regards

Title: Re: How to remove Tiller Cover of Kymco Agility Mobility Scooter
Post by: CROSSBOLT on September 28, 2021, 09:35:18 PM

Let us know how it turns out. I would install a fuseholder that can be serviced without removing body parts!