KymcoForum.com
Scooters - 125 to 300 => Movie 150 => Topic started by: Jim Moore on July 22, 2021, 11:04:24 PM
-
Hi Guys,
I spent an entire day searching for a drive belt on Monday. It was almost impossible to find. To save you the trouble I'm here to reveal my findings. A Bando 781 / 20 / 30 will work. $50 on Amazon. Apparently an 800 Malossi will work too.
-
thanks, I'm sure someone will appreciate that info! I had to look up the Movie 150 as I wasn't familiar with it. It looks like a very nice 150cc scoot with some nice touches (led lighting, 4 valve head, rear disc). I also see it was only imported to the US market in '13 and '14, making it very rare, I'm sure.
Was this motor ever shared with any other Kymco scoot?
-
It's a hell of a nice scooter. But it's so rare that most shops haven't even heard of it. I think it shares the same 4-valve engine as the Like 150i, minus the fuel injection.
-
Great information!!! was looking for a few days. Then found this post!
Says made in japan Kevlar Bando Brand Premium Kevlar CVT Drive Belt size 781-20-30 found on the Kymco People 150, Kymco Racing 125, Kymco Agility RS 125, Kymco Agility City 150, Kymco 125 Movie XL '01 and Kymco 150 Movie XL '01. Kevlar Length: 781mm Top Width: 20mm Groove Angle: 30 Made in Japan
-
Hi,
when is the belt due for replacement? I have 3600 miles on my (new to me) Movie 150 that I just got and I do not know the history. I am going to assume that it has never been checked or replaced.
-
@Rey, here you go
https://www.manualslib.com/manual/944156/Kymco-Movie-150.html?page=23#manual
there is all you need
-
Thank you! I guess better pop the cover off and take a peek.
-
@Rey, judgement depends on your experience with CVTs. With this milage shouldn't be that much of tear and wear on your belt. Except there would be a lot of rubber dust visible. But since the scoot is 9 years old, I would check rollers and clutch too.