KymcoForum.com
Scooters - 50cc => Agility 50 => Topic started by: CONLEY on October 23, 2010, 05:00:13 PM
-
so going to put some rings in my buddies 150 pos today
what is the break in time what do we need to do so i dont have to do this again
-
If you are talking about the sunl you should encourage him to get it running and sell it as quickly as possible , IMO . Good luck .
-
ur not jokein bud
i'm a craigslist freak see these all the time same mileage will blown motors
they look good and clean but don't run lol
but thats the plan fix and sell but knowing him hes going to keep it (dumb @$$)
-
..well, i've never installed new rings...yet....
..probably going to when i re-build the guilty tho...
-
ur not jokein bud
i'm a craigslist freak see these all the time same mileage will blown motors
they look good and clean but don't run lol
but thats the plan fix and sell but knowing him hes going to keep it (dumb @$$)
been there done that craiglist was good to me also I got a scoot for 100 the back end was all good but the front needed to be replaced it turned out to be a real good deal this scoot now gos 50 top speed.
-
i see grat deals all the time just aint got no money
that and the boss don't want a bunch of "junk" layin around
need a secret warehouse to hid all my toys lol
-
i see grat deals all the time just aint got no money
that and the boss don't want a bunch of "junk" layin around
need a secret warehouse to hid all my toys lol
LOL I know the feeling .
-
...we're all broke...
..dammit...
-
Could be worse - we could all be broke and driving generic Chinese scoots...
-
we could all be broke and driving generic Chinese scoots...
..NEVER!!!!
-
Exactly!
Too bad the wife just made it very clear a S 8 2T isn't in my future - at least not anytime soon. >:(
-
Too bad the wife just made it very clear a S 8 2T isn't in my future - at least not anytime soon.
Awww...Sorry, oswaldters.
-
well, hard to argue with common sense.
...unfair fighting on her part!
-
...reckon i misse dout on the common sense part....
..put a craigslist on the guilty and post that you're looking for a super8 on another...
..it'd bee like a "trade" if you could work it out!!!
-
A sensible strategy.
However, I'll let sleeping dogs lie at this point...
I still have lots of room to do some tuning and modding on the guilty anyway.
Must keep focus....
-
That's right, oswaldters, break out them tools. :D
-
Must keep focus
-
Ouch, that's going to leave a mark!
-
,,im sorry..i got you slapped, didn i...
-
break out them tools
Damn - still haven't received my cheap impact wrench yet.
Might have to try and get after that variator nut without it tomorrow.
I know it can be done the hard way - but was hoping to do it the easy way.
-
,,im sorry..i got you slapped, didn i...
Three second rule - can look, but not stare!
-
I know it can be done the hard way - but was hoping to do it the easy way.
-
Three second rule - can look, but not stare!
..yeah, i remember that rule....
;D
-
Wish I had a vice grip that size.
I hope to be able to borrow the neighbor's impact wrench - but he hasn't been home all day.
Some nerve....
-
..they're at home depot and lowes and walmart...
-
That's right, oswaldters, if I can do, you can do it! :D
I saw some of them tools at the pawn shop pretty cheap...dirty lookin', but cheap. lol
-
..mines dirty..rusty...works like a charm!!
-
..they're at home depot and lowes and walmart...
I know, and it's been like 7 days since I was at Home Depot buying something so I'm due....
If the neighbor doesn't show up by tomorrow morning, I may have no choice but to stop by HD when I, out of the goodness of my heart, decide to volunteer to go out and get some Dunkin' Donut coffee in the morning (as a special Sunday treat).
-
..i reckon you might have to pass by home depot on the way for donuts.......
..and maybe you remembered that "clamp pic" from the forum when you saw the HD sign...huh??
???
-
Sure, I mean the kids will need something like that for a science project for school I'm sure.
I'm only thinking about my girls and their education.
-
I'm only thinking about my girls and their education.
...okaaay...science is gooood...
..so you google HD Vise-gips yet??
..they got'm in stock??
-
I'm only thinking about my girls and their education.
lmao...oswaldters is working his way up to another slap...
-
Yeah, I suppose if that line isn't working here - it won't work tomorrow!
-
oswaldters is working his way up to another slap...
..rianna!!..shhhh...if we don't speak it it won't happen!!..
;)
-
My fear isn't getting slapped - it's that she would use those vise grips to do some kind of Three Stooges thing where she uses them to grab me by my ears or something.
-
LOL...okay, I'll be quiet, then, but really, I have doubts that line will get a pleasant result...
-
where she uses them to grab me by my ears or something.
..be grateful if she goes for the ears!!!!
:o
..NUTS!!...i mean DANG!!...
;D
-
;D
She's actually very nice and would never visit bodily harm on me - just for the record.
However, I do have family in town this weekend so in the end I should focus on seeing them since we only get together a few times a year.
Maybe I will have to wait until next weekend :-\
-
Even cheaper than Home Depot. Plus you get three different sizes. I have several different clamps like this and use them all the time.
http://www.harborfreight.com/3-piece-locking-c-clamp-set-6002.html (http://www.harborfreight.com/3-piece-locking-c-clamp-set-6002.html)
(http://www.harborfreight.com/media/catalog/product/cache/1/thumbnail/370x370/9df78eab33525d08d6e5fb8d27136e95/i/m/image_1472.jpg)
-
Thanks Pedro.
That looks like too good a deal to pass up. Clearly I need those clamps in my life!
Good thing there's a Harbor Freight store not too far away.
-
Their electric tools are disposable but they're hand tools last quite a while. You can't beat cheap.
-
..i just like the feel of a hand tool when working on my scoot...
..i KNOW how much torque i'm using....
-
That's a good point Word - I always worry about over torquing something.
The beauty of the impact wrench in my opinion is really getting tight/rusted nuts to open easily.
Putting them back on I'd rather be able to do it by hand to make sure they don't get over tightened.
-
..been working in industrial maintenance for over 20 years...
..kinda get a feel for torquing fasteners and such...
..these aluminum casings will not withstand ANY hard torque...
..the drive shaft nut is considered a stretch threaded nut..not to be torqued repeatedly...so, when you re-assemble, use a small bit of blue "lock-tite" threadlocker on the inner threads of the nut..
..don't need more than a glazing..
..but it's that extra bit of reassurance that counts...
-
small bit of blue "lock-tite" threadlocker
Now that I do have.
Progress!
-
I need me some of that. Saw some at the grocery store for like 5 bucks.
-
..these aluminum casings will not withstand ANY hard torque...
..always tighten your cvt cover fasteners by hand..
..even a 3/8" air ratchet will over-torque and strip out threads...
..been there...
-
That's the benefit of not owning any of those fancy tools - I have no choice but to do it by hand!
-
I have no choice but to do it by hand!
..but itsa good choice..
..you become one with your scoot... 8)
-
Yep,
And it ends up being a blood bond - especially when I bash my knuckles on something while trying to get something loose.
-
..then you gotta suck the tube....
..it's like the circle of life thing...
-
...and then smear some grease on my face to complete the circle?
-
..or just throw up...i dunno...
..all according to which tube you suck...
:D
-
..or just throw up
But don't do it in the met-in box.
-
...hey os........
.. Beverly Hillbilly style ..
...okaaaay..so here we go....
.....come and listen to a story 'bout a man named word...
..poor scooter rider, try to get his story heard...
..and then one day while he was scootin for th mooood......
..over came a car and now he's so much worm fooood...
..soil, that is..
..dirt dead..
..rest in peeace...
..Ya'll come back now, y'hear?!..
-
A good theme song to be working with - but we need a happy ending to the song.
-
Damn....
Didn't get to open up the cvt this weekend.
Shame, the weather was perfect, but had family in town so spent the weekend with them.
Need to get the variator tuned....
-
not to get back on topic and all but i gut her all back together but dont know the rules of break in time on these things
anyone know what i should do
-
..i don't..
..never done it..but again, i'm listening!!!!
;)
-
Seems to be a controversial topic judging by the variety of stuff I've read on the topic.
This was an interesting approach: http://www.mototuneusa.com/break_in_secrets.htm (http://www.mototuneusa.com/break_in_secrets.htm)