KymcoForum.com

General => Technical | How To => Topic started by: Kornsteven on May 23, 2021, 03:38:51 PM

Title: Kymco ck1 125 clutch torque?
Post by: Kornsteven on May 23, 2021, 03:38:51 PM

Hello just wondering if anyone knows of any torque settings for the clutch on the ck1 125?

Or if anyone has access to a manual would be amazing

Thanks in advanced

Title: Re: Kymco ck1 125 clutch torque?
Post by: big blue on May 23, 2021, 05:15:49 PM

Here is a download for the manual, I don't know about free but worth a try...http://tctechnology.com.pe/cgi-bin/content/view.php?data=kymco_ck_125_service_manual&filetype=pdf&id=c50008688004fd9a7b0fa699895c6e02

Title: Re: Kymco ck1 125 clutch torque?
Post by: Kornsteven on May 23, 2021, 06:42:20 PM

Thanks for the link, but that is for the "ck" I have the "ck1"

Thanks anyway

Title: Re: Kymco ck1 125 clutch torque?
Post by: JJJoseph on May 27, 2021, 07:19:16 AM

Quote from: Kornsteven on May 23, 2021, 03:38:51 PM

Hello just wondering if anyone knows of any torque settings for the clutch on the ck1 125?

What "torque" are you looking for?  The large nut that holds it together? There is no "torque setting", you just tighten it to the stop.  Or is there some other "torque setting" you're looking for?

Title: Re: Kymco ck1 125 clutch torque?
Post by: Ruffus on May 27, 2021, 10:03:27 AM

@Kornsteven,
(pls see pics) the big 39mm nut I do as hard as I can on this flat piece without stripping the flange, holding the clutch pulley with an oil-filter spanner (belt type).
The assambly nut , 17mm, I fasten to 90nm with a torque. Both nuts get a few drops of blue Loctite 243 on it just in case.

Title: Re: Kymco ck1 125 clutch torque?
Post by: JJJoseph on May 29, 2021, 03:48:52 AM

Quote from: Ruffus on May 27, 2021, 10:03:27 AM

@Kornsteven,
(pls see pics) the big 39mm nut I do as hard as I can on this flat piece without stripping the flange, holding the clutch pulley with an oil-filter spanner (belt type).
The assambly nut , 17mm, I fasten to 90nm with a torque. Both nuts get a few drops of blue Loctite 243 on it just in case.

Yes, that's sounds just about right.  Or that's exactly how I do it, and never any problems!