KymcoForum.com

Scooters - 125 to 300 => Downtown 300 => Topic started by: Yoni159 on October 09, 2020, 05:35:54 PM

Title: Engine error light
Post by: Yoni159 on October 09, 2020, 05:35:54 PM

 Hi i was changed my front light bulbs and after installation i was go to little ride and o notice engine error light blinks 3 times and then 6 times its means error 12 and error 15. Someone know why i could happen? Its happened really after i changed the bulbs.

Title: Re: Engine error light
Post by: CROSSBOLT on October 09, 2020, 10:16:47 PM

Three short flashes, pause, 6 short flashes, long pause, then all over again? Or is it three long flashes then 6 short flashes?

Title: Re: Engine error light
Post by: Yoni159 on October 10, 2020, 01:42:10 AM

https://youtu.be/97DcjcZI_6U

Title: Re: Engine error light
Post by: CROSSBOLT on October 10, 2020, 10:42:53 AM

I get 12 and 15 for engine code flashes. That is 12 = faulty water temp sensor and 15 = faulty tilt switch (roll sensor). Do ohms check on these to start with. Service manual at manualslib app.

Please report back here with progress or more questions. We will be ready to help or cry with you!